NOTIFY is like IDLE, but where IDLE watches just the selected mailbox, NOTIFY
can watch all mailboxes. With NOTIFY, a client can also ask a server to
immediately return configurable fetch attributes for new messages, e.g. a
message preview, certain header fields, or simply the entire message.
Mild testing with evolution and fairemail.
As required by RFC 2045 (MIME). The 78 byte lines work in practice, except that
SpamAssassin has rules that give messages with 78-byte lines spam points.
Mentioned by kjetilho on irc.
We were already generating previews of plain text parts for the webmail
interface, but we didn't store them, so were generating the previews each time
messages were listed.
Now we store previews in the database for faster handling. And we also generate
previews for html parts if needed. We use the first part that has textual
content.
For IMAP, the previews can be requested by an IMAP client. When we get the
"LAZY" variant, which doesn't require us to generate a preview, we generate it
anyway, because it should be fast enough. So don't make clients first ask for
"PREVIEW (LAZY)" and then again a request for "PREVIEW".
We now also generate a preview when a message is added to the account. Except
for imports. It would slow us down, the previews aren't urgent, and they will
be generated on-demand at first-request.
Adding to the queue is done in a transaction, the queue db file is mox-global.
Appending the message to the Sent folder, removing it from Drafts, marking the
original message as answered/forwarded, is done in a separate database
transaction that gets the ctx passed in. If the ctx was canceled in between,
the queueing was finished, but the rest wasn't completed.
Reported by mteege, thanks!
Especially relevant when the name contains a comma, e.g. "lastname, firstname".
Or when it contains parentheses, e.g. "(organization)".
When sending to an address with a comma that isn't quoted, we would actually
interpret it as two addresses: One without an "@" before the comma, and the
second part after the comma with half of the name and the email addrss. This
resulted in an error message.
When sending to a recipient with unquoted parentheses in the name, those
parentheses would be interpreted as an generic email header comment, and left
out.
For issue #305 by mattfbacon.
The original config option stays, and we still use it for the common case where
we have a single separator. The "+" is configured by default. It is optional,
just like the new option "LocalpartCatchallSeparators" (plural).
When parsing the config file, we combine LocalpartCatchallSeparator and
LocalpartCatchallSeparators into a single list
LocalpartCatchallSeparatorsEffective, which we use throughout the code.
For issue #301 by janc13
Keeping the message files around, and the message details in the database, is
useful for IMAP sessions that haven't seen/processed the removal of a message
yet and try to fetch it. Before, we would return errors. Similarly, a session
that has a mailbox selected that is removed can (at least in theory) still read
messages.
The mechanics to do this need keeping removed mailboxes around too. JMAP needs
that anyway, so we now keep modseq/createseq/expunged history for mailboxes
too. And while we're at it, for annotations as well.
For future JMAP support, we now also keep the mailbox parent id around for a
mailbox, with an upgrade step to set the field for existing mailboxes and
fixing up potential missing parents (which could possibly have happened in an
obscure corner case that I doubt anyone ran into).
DeliverMessage() is now MessageAdd(), and it takes a Mailbox object that it
modifies but doesn't write to the database (the caller must do it, and plenty
of times can do it more efficiently by doing it once for multiple messages).
The new AddOpts let the caller influence how many checks and how much of the
work MessageAdd() does. The zero-value AddOpts enable all checks and all the
work, but callers can take responsibility of some of the checks/work if it can
do it more efficiently itself.
This simplifies the code in most places, and makes it more efficient. The
checks to update per-mailbox keywords is a bit simpler too now.
We are also more careful to close the junk filter without saving it in case of
errors.
Still part of more upcoming changes.
i added the metadata extension to the imapserver recently. then i wondered how
a client would efficiently find changed metadata. turns out the qresync rfc
mentions that metadata changes should set a new modseq on the mailbox.
shouldn't be hard, except that we were not explicitly keeping track of modseqs
per mailbox. we only kept them for messages, and we were just looking up the
latest message modseq when we needed the modseq (we keep db entries for
expunged messages, so this worked out fine). that approach isn't enough
anymore. so know we keep track of modseq & createseq for mailboxes, just as for
messages. and we also track modseq/createseq for annotations. there's a good
chance jmap is going to need it.
this also adds consistency checks for modseq/createseq on mailboxes and
annotations to the account storage. it helped spot cases i missed where the
values need to be updated.
we already supported special-use flags. settable through the webmail interface,
and new accounts already got standard mailboxes with special-use flags
predefined. but now the IMAP "CREATE" command implements creating mailboxes
with special-use flags.
this allows setting per-mailbox and per-server annotations (metadata). we have
a fixed maximum for total number of annotations (1000) and their total size
(1000000 bytes). this size isn't held against the regular quota for simplicity.
we send unsolicited metadata responses when a connection is in the idle
command and a change to a metadata item is made.
we currently only implement the /private/ namespace. we should implement the
/shared/ namespace, for mox-global metadata annotations. only the admin should
be able to configure those, probably through the config file, cli, or admin web
interface.
for issue #290
to facilitate migrations from/to other mail setups.
a domain can be added in "disabled" mode (or can be disabled/enabled later on).
you can configure a disabled domain, but incoming/outgoing messages involving
the domain are rejected with temporary error codes (as this may occur during a
migration, remote servers will try again, hopefully to the correct machine or
after this machine has been configured correctly). also, no acme tls certs will
be requested for disabled domains (the autoconfig/mta-sts dns records may still
point to the current/previous machine). accounts with addresses at disabled
domains can still login, unless logins are disabled for their accounts.
an account now has an option to disable logins. you can specify an error
message to show. this will be shown in smtp, imap and the web interfaces. it
could contain a message about migrations, and possibly a URL to a page with
information about how to migrate. incoming/outgoing email involving accounts
with login disabled are still accepted/delivered as normal (unless the domain
involved in the messages is disabled too). account operations by the admin,
such as importing/exporting messages still works.
in the admin web interface, listings of domains/accounts show if they are disabled.
domains & accounts can be enabled/disabled through the config file, cli
commands and admin web interface.
for issue #175 by RobSlgm
and mention in a tooltip too that "empty mailbox" only affects messages in the
mailbox, not submailboxes or their messages.
prompted by a question on matrix/irc
by not trying to parse the full message for the MessageItem, but only reading
headers when needed.
before previous commit, we wouldn't try reading such messages in full either.
for each message part. The ContentDisposition value is the base value without
header key/value parameters. the Filename field is the likely filename of the
part. the different email clients encode filenames differently. there is a
standard mime mechanism from rfc 2231. and there is the q/b-word-encoding from
rfc 2047. instead of letting users of the webhook api deal with those
differences, we provide just the parsed filename.
for issue #258 by morki, thanks for reporting!
needed for upcoming changes, where (now) package admin needs to import package
store. before, because package store imports mox- (for accessing the active
config), that would lead to a cyclic import. package mox- keeps its active
config, package admin has the higher-level config-changing functions.
before this change, when archiving, we would move all messages from the thread
that are in the same mailbox as that of the response message to the archive
mailbox. so if the message that was being responsed to was already in the
archive mailbox, the message would be moved from archive mailbox to archive
mailbox, resulting in an error.
with this change, when archiving, we move the thread messages that are in the
same mailbox as is currently open (independent of the mailbox the message lives
in, a common situation in the threading view). if there is no open mailbox
(search results), we still use the mailbox of the message being responded to as
reference.
with this new approach, we won't get errors moving a message to an archive
mailbox when it's already there. well, you can still get that error, but then
you've got the archive mailbox open, or you're in a search result and
responding to an archived message. the error should at least help understand
that nothing is happening.
we are only moving the messages from one active/reference mailbox because we
don't want to move messages from the thread that are in the Sent mailbox, and
we also don't want to move duplicate messages (cross-posts to mailing lists)
that are in other mailboxes. moving only the messages from the current active
mailbox seems safe, and should do what is what users would expect most of the
time.
for issue #233 by mattfbacon, thanks for reporting!
these singleusetokens can be redeemed once. so when you see it in the logs, it
can't be used again. they are short-lived anyway.
this change should help prevent me periodically investigating token handling...
as they occur in From/To headers, for example: "From:
=?iso-8859-2?Q?Krist=FDna?= <k@example.com>". we are using net/mail to parse
such headers. most address-parsing functions in that package will only decode
charsets utf-8, iso-8859-1 and us-ascii. we have to be careful to always use
net/mail.AddressParser with a WordDecoder that understands more that the
basics.
for issue #204 by morki, thanks for reporting!
the members must currently all be addresses of local accounts.
a message sent to an alias is accepted if at least one of the members accepts
it. if no members accepts it (e.g. due to bad reputation of sender), the
message is rejected.
if a message is submitted to both an alias addresses and to recipients that are
members of the alias in an smtp transaction, the message will be delivered to
such members only once. the same applies if the address in the message
from-header is the address of a member: that member won't receive the message
(they sent it). this prevents duplicate messages.
aliases have three configuration options:
- PostPublic: whether anyone can send through the alias, or only members.
members-only lists can be useful inside organizations for internal
communication. public lists can be useful for support addresses.
- ListMembers: whether members can see the addresses of other members. this can
be seen in the account web interface. in the future, we could export this in
other ways, so clients can expand the list.
- AllowMsgFrom: whether messages can be sent through the alias with the alias
address used in the message from-header. the webmail knows it can use that
address, and will use it as from-address when replying to a message sent to
that address.
ideas for the future:
- allow external addresses as members. still with some restrictions, such as
requiring a valid dkim-signature so delivery has a chance to succeed. will
also need configuration of an admin that can receive any bounces.
- allow specifying specific members who can sent through the list (instead of
all members).
for github issue #57 by hmfaysal.
also relevant for #99 by naturalethic.
thanks to damir & marin from sartura for discussing requirements/features.
if the message has a list-id header, we assume this is a (mailing) list
message, and we require a dkim/spf-verified domain (we prefer the shortest that
is a suffix of the list-id value). the rule we would add will mark such
messages as from a mailing list, changing filtering rules on incoming messages
(not enforcing dmarc policies). messages will be matched on list-id header and
will only match if they have the same dkim/spf-verified domain.
if the message doesn't have a list-id header, we'll ask to match based on
"message from" address.
we don't ask the user in several cases:
- if the destination/source mailbox is a special-use mailbox (e.g.
trash,archive,sent,junk; inbox isn't included)
- if the rule already exist (no point in adding it again).
- if the user said "no, not for this list-id/from-address" in the past.
- if the user said "no, not for messages moved to this mailbox" in the past.
we'll add the rule if the message was moved out of the inbox.
if the message was moved to the inbox, we check if there is a matching rule
that we can remove.
we now remember the "no" answers (for list-id, msg-from-addr and mailbox) in
the account database.
to implement the msgfrom rules, this adds support to rulesets for matching on
message "from" address. before, we could match on smtp from address (and other
fields). rulesets now also have a field for comments. webmail adds a note that
it created the rule, with the date.
manual editing of the rulesets is still in the webaccount page. this webmail
functionality is just a convenient way to add/remove common rules.
the regular send shortcut is control+Enter. the shift enables "archive thread".
there is no configuration option, you'll always get the button, but only for
reply/forward, not for new compose.
we may do "send and move thread to thrash", but let's wait until people want it.
for github issue #135 by mattfbacon
when sending a message with bcc's, prepend the bcc header to the message we
store in the sent folder. still not in the message we send to the recipients.
for applications to compose/send messages, receive delivery feedback, and
maintain suppression lists.
this is an alternative to applications using a library to compose messages,
submitting those messages using smtp, and monitoring a mailbox with imap for
DSNs, which can be processed into the equivalent of suppression lists. but you
need to know about all these standards/protocols and find libraries. by using
the webapi & webhooks, you just need a http & json library.
unfortunately, there is no standard for these kinds of api, so mox has made up
yet another one...
matching incoming DSNs about deliveries to original outgoing messages requires
keeping history of "retired" messages (delivered from the queue, either
successfully or failed). this can be enabled per account. history is also
useful for debugging deliveries. we now also keep history of each delivery
attempt, accessible while still in the queue, and kept when a message is
retired. the queue webadmin pages now also have pagination, to show potentially
large history.
a queue of webhook calls is now managed too. failures are retried similar to
message deliveries. webhooks can also be saved to the retired list after
completing. also configurable per account.
messages can be sent with a "unique smtp mail from" address. this can only be
used if the domain is configured with a localpart catchall separator such as
"+". when enabled, a queued message gets assigned a random "fromid", which is
added after the separator when sending. when DSNs are returned, they can be
related to previously sent messages based on this fromid. in the future, we can
implement matching on the "envid" used in the smtp dsn extension, or on the
"message-id" of the message. using a fromid can be triggered by authenticating
with a login email address that is configured as enabling fromid.
suppression lists are automatically managed per account. if a delivery attempt
results in certain smtp errors, the destination address is added to the
suppression list. future messages queued for that recipient will immediately
fail without a delivery attempt. suppression lists protect your mail server
reputation.
submitted messages can carry "extra" data through the queue and webhooks for
outgoing deliveries. through webapi as a json object, through smtp submission
as message headers of the form "x-mox-extra-<key>: value".
to make it easy to test webapi/webhooks locally, the "localserve" mode actually
puts messages in the queue. when it's time to deliver, it still won't do a full
delivery attempt, but just delivers to the sender account. unless the recipient
address has a special form, simulating a failure to deliver.
admins now have more control over the queue. "hold rules" can be added to mark
newly queued messages as "on hold", pausing delivery. rules can be about
certain sender or recipient domains/addresses, or apply to all messages pausing
the entire queue. also useful for (local) testing.
new config options have been introduced. they are editable through the admin
and/or account web interfaces.
the webapi http endpoints are enabled for newly generated configs with the
quickstart, and in localserve. existing configurations must explicitly enable
the webapi in mox.conf.
gopherwatch.org was created to dogfood this code. it initially used just the
compose/smtpclient/imapclient mox packages to send messages and process
delivery feedback. it will get a config option to use the mox webapi/webhooks
instead. the gopherwatch code to use webapi/webhook is smaller and simpler, and
developing that shaped development of the mox webapi/webhooks.
for issue #31 by cuu508
The `TransportDirect` transport allows to tweak outgoing SMTP
connections to remote servers. Currently, it only allows to select
network IP family (ipv4, ipv6 or both).
For example, to disable ipv6 for all outgoing SMTP connections:
- add these lines in mox.conf to create a new transport named
"disableipv6":
```
Transports:
disableipv6:
Direct:
DisableIpv6: true
```
- then add these lines in domains.conf to use this transport:
```
Routes:
-
Transport: disableipv6
```
fix#149
before, an error about an invalid address was not used, causing a delivery
attempt to an empty address (empty localpart/domain). delivery to that address
would fail, but we should've prevented that message from being queued at all.
additionally, an error in adding the message to the queue was ignored too.
both when parsing our configs, and for incoming on smtp or in messages.
so we properly compare things like é and e+accent as equal, and accept the
different encodings of that same address.
transferring the data only once. we only do this when the recipient domains
are the same. when queuing, we now take care to set the same NextAttempt
timestamp, so queued messages are actually eligable for combined delivery.
this adds a DeliverMultiple to the smtp client. for pipelined requests, it will
send all RCPT TO (and MAIL and DATA) in one go, and handles the various
responses and error conditions, returning either an overal error, or per
recipient smtp responses. the results of the smtp LIMITS extension are also
available in the smtp client now.
this also takes the "LIMITS RCPTMAX" smtp extension into account: if the server
only accepts a single recipient, we won't send multiple.
if a server doesn't announce a RCPTMAX limit, but still has one (like mox does
for non-spf-verified transactions), we'll recognize code 452 and 552 (for
historic reasons) as temporary error, and try again in a separate transaction
immediately after. we don't yet implement "LIMITS MAILMAX", doesn't seem likely
in practice.
the smtp extension, rfc 4865.
also implement in the webmail.
the queueing/delivery part hardly required changes: we just set the first
delivery time in the future instead of immediately.
still have to find the first client that implements it.
to start composing a message.
the help popup now has a button to register the "mailto:" links with the mox
webmail (typically only works over https, not all browsers support it).
the mailto links are specified in 6068. we support the to/cc/bcc/subject/body
parameters. other parameters should be seen as custom headers, but we don't
support messages with custom headers at all at the moment, so we ignore them.
we now also turn text of the form "mailto:user@host" into a clickable link
(will not be too common). we could be recognizing any "x@x.x" as email address
and make them clickable in the future.
thanks to Hans-Jörg for explaining this functionality.
the http basic auth we had was very simple to reason about, and to implement.
but it has a major downside:
there is no way to logout, browsers keep sending credentials. ideally, browsers
themselves would show a button to stop sending credentials.
a related downside: the http auth mechanism doesn't indicate for which server
paths the credentials are.
another downside: the original password is sent to the server with each
request. though sending original passwords to web servers seems to be
considered normal.
our new approach uses session cookies, along with csrf values when we can. the
sessions are server-side managed, automatically extended on each use. this
makes it easy to invalidate sessions and keeps the frontend simpler (than with
long- vs short-term sessions and refreshing). the cookies are httponly,
samesite=strict, scoped to the path of the web interface. cookies are set
"secure" when set over https. the cookie is set by a successful call to Login.
a call to Logout invalidates a session. changing a password invalidates all
sessions for a user, but keeps the session with which the password was changed
alive. the csrf value is also random, and associated with the session cookie.
the csrf must be sent as header for api calls, or as parameter for direct form
posts (where we cannot set a custom header). rest-like calls made directly by
the browser, e.g. for images, don't have a csrf protection. the csrf value is
returned by the Login api call and stored in localstorage.
api calls without credentials return code "user:noAuth", and with bad
credentials return "user:badAuth". the api client recognizes this and triggers
a login. after a login, all auth-failed api calls are automatically retried.
only for "user:badAuth" is an error message displayed in the login form (e.g.
session expired).
in an ideal world, browsers would take care of most session management. a
server would indicate authentication is needed (like http basic auth), and the
browsers uses trusted ui to request credentials for the server & path. the
browser could use safer mechanism than sending original passwords to the
server, such as scram, along with a standard way to create sessions. for now,
web developers have to do authentication themselves: from showing the login
prompt, ensuring the right session/csrf cookies/localstorage/headers/etc are
sent with each request.
webauthn is a newer way to do authentication, perhaps we'll implement it in the
future. though hardware tokens aren't an attractive option for many users, and
it may be overkill as long as we still do old-fashioned authentication in smtp
& imap where passwords can be sent to the server.
for issue #58
