We now use "*string" for such header fields, for Content-* fields, as used in
the imapserver when responding to FETCH commands. We'll now return NIL for an
absent header, and "" (empty string) if the header value is empty.
NOTIFY is like IDLE, but where IDLE watches just the selected mailbox, NOTIFY
can watch all mailboxes. With NOTIFY, a client can also ask a server to
immediately return configurable fetch attributes for new messages, e.g. a
message preview, certain header fields, or simply the entire message.
Mild testing with evolution and fairemail.
The gmail iOS/Android app were showing mime image parts as (garbled) text
instead of rendering them as image. By returning all the optional fields in the
bodystructure fetch attribute, the gmail app renders the image as expected by
the user. So we now add all fields. We didn't before, because we weren't
keeping track of Content-MD5, Content-Language and Content-Location header
fields, since they aren't that useful.
Messages in mailboxes have to be reparsed:
./mox reparse
Without reparsing, imap responses will claim the extra fields
(content-disposition) are absent for existing messages, instead of not claiming
anything at all, which is what we did before.
Accounts and all/some mailboxes can get their "uid validity" bumped ("./mox
bumpuidvalidity $account [$mailbox]"), which should trigger clients to load all
messages from scratch, but gmail doesn't appear to notice, so it would be
better to remove & add the account in gmail.
For issue #327, also relevant to issue #217.
We were already generating previews of plain text parts for the webmail
interface, but we didn't store them, so were generating the previews each time
messages were listed.
Now we store previews in the database for faster handling. And we also generate
previews for html parts if needed. We use the first part that has textual
content.
For IMAP, the previews can be requested by an IMAP client. When we get the
"LAZY" variant, which doesn't require us to generate a preview, we generate it
anyway, because it should be fast enough. So don't make clients first ask for
"PREVIEW (LAZY)" and then again a request for "PREVIEW".
We now also generate a preview when a message is added to the account. Except
for imports. It would slow us down, the previews aren't urgent, and they will
be generated on-demand at first-request.
The original config option stays, and we still use it for the common case where
we have a single separator. The "+" is configured by default. It is optional,
just like the new option "LocalpartCatchallSeparators" (plural).
When parsing the config file, we combine LocalpartCatchallSeparator and
LocalpartCatchallSeparators into a single list
LocalpartCatchallSeparatorsEffective, which we use throughout the code.
For issue #301 by janc13
Keeping the message files around, and the message details in the database, is
useful for IMAP sessions that haven't seen/processed the removal of a message
yet and try to fetch it. Before, we would return errors. Similarly, a session
that has a mailbox selected that is removed can (at least in theory) still read
messages.
The mechanics to do this need keeping removed mailboxes around too. JMAP needs
that anyway, so we now keep modseq/createseq/expunged history for mailboxes
too. And while we're at it, for annotations as well.
For future JMAP support, we now also keep the mailbox parent id around for a
mailbox, with an upgrade step to set the field for existing mailboxes and
fixing up potential missing parents (which could possibly have happened in an
obscure corner case that I doubt anyone ran into).
i added the metadata extension to the imapserver recently. then i wondered how
a client would efficiently find changed metadata. turns out the qresync rfc
mentions that metadata changes should set a new modseq on the mailbox.
shouldn't be hard, except that we were not explicitly keeping track of modseqs
per mailbox. we only kept them for messages, and we were just looking up the
latest message modseq when we needed the modseq (we keep db entries for
expunged messages, so this worked out fine). that approach isn't enough
anymore. so know we keep track of modseq & createseq for mailboxes, just as for
messages. and we also track modseq/createseq for annotations. there's a good
chance jmap is going to need it.
this also adds consistency checks for modseq/createseq on mailboxes and
annotations to the account storage. it helped spot cases i missed where the
values need to be updated.
it makes a new field available on stored messages. not when they they were
received (over smtp) or appended to the mailbox (over imap), but when they were
last "saved" in the mailbox. copy/move of a message (eg to the trash) resets
the "savedate" value. this helps implement "remove messages from trash after X
days".
this allows setting per-mailbox and per-server annotations (metadata). we have
a fixed maximum for total number of annotations (1000) and their total size
(1000000 bytes). this size isn't held against the regular quota for simplicity.
we send unsolicited metadata responses when a connection is in the idle
command and a change to a metadata item is made.
we currently only implement the /private/ namespace. we should implement the
/shared/ namespace, for mox-global metadata annotations. only the admin should
be able to configure those, probably through the config file, cli, or admin web
interface.
for issue #290
broken in v0.0.14, probably when introducing the css variables.
i had noticed this issue at the time, and thought i fixed it, but clearly not.
for issue #278, reported by gdunstone
i've seen the error a few times:
msgheaderElem.children[(msgheaderElem.children.length - 1)] is undefined
i've seen it happen after sending a reply (with the "answered" flag added).
the updateKeywords callback would render the message again, but the code for
rendering the "additional headers" table rows again was making invalid
assumptions.
the approach is now changed. the backend now just immediately sends the
additional headers to the frontend. before, the frontend would first render the
base message, then render again once the headers came in for the parsed
message. this also prevents a reflow for the (quite common) case that one of
the additional headers are present in the message.
these settings are applied anywhere the webmail is open. the settings are for
showing keyboard shortcuts in the lower right after a mouse interaction, and
showing additional headers. the shorcuts were configurable in the "help" popup
before. the additional headers were only configurable through the developer
console before.
the "mailto:" (un)register buttons are now in the settings popup too.
if files {webmail,webaccount,webadmin}.{css,js} exist in the configdir (where
the mox.conf file lives), their contents are included in the web apps.
the webmail now uses css variables, mostly for colors. so you can write a
custom webmail.css that changes the variables, e.g.:
:root {
--color: blue
}
you can also look at css class names and override their styles.
in the future, we may want to make some css variables configurable in the
per-user settings in the webmail. should reduce the number of variables first.
any custom javascript is loaded first. if it defines a global function
"moxBeforeDisplay", that is called each time a page loads (after
authentication) with the DOM element of the page content as parameter. the
webmail is a single persistent page. this can be used to make some changes to
the DOM, e.g. inserting some elements. we'll have to see how well this works in
practice. perhaps some patterns emerge (e.g. adding a logo), and we can make
those use-cases easier to achieve.
helps partially with issue #114, and based on questions from laura-lilly on
matrix.
before this change, when archiving, we would move all messages from the thread
that are in the same mailbox as that of the response message to the archive
mailbox. so if the message that was being responsed to was already in the
archive mailbox, the message would be moved from archive mailbox to archive
mailbox, resulting in an error.
with this change, when archiving, we move the thread messages that are in the
same mailbox as is currently open (independent of the mailbox the message lives
in, a common situation in the threading view). if there is no open mailbox
(search results), we still use the mailbox of the message being responded to as
reference.
with this new approach, we won't get errors moving a message to an archive
mailbox when it's already there. well, you can still get that error, but then
you've got the archive mailbox open, or you're in a search result and
responding to an archived message. the error should at least help understand
that nothing is happening.
we are only moving the messages from one active/reference mailbox because we
don't want to move messages from the thread that are in the Sent mailbox, and
we also don't want to move duplicate messages (cross-posts to mailing lists)
that are in other mailboxes. moving only the messages from the current active
mailbox seems safe, and should do what is what users would expect most of the
time.
for issue #233 by mattfbacon, thanks for reporting!
these singleusetokens can be redeemed once. so when you see it in the logs, it
can't be used again. they are short-lived anyway.
this change should help prevent me periodically investigating token handling...
this started with looking into the dark mode of PR #163 by mattfbacon. it's a
very good solution, especially for the amount of code. while looking into dark
mode, some common problems with inverting colors are:
- box-shadow start "glowing" which isn't great. likewise, semitransparent
layers would become brighter, not darker.
- while popups/overlays in light mode just stay the same white, in dark mode
they should become lighter than the regular content because box shadows don't
give enough contrast in dark mode.
while looking at adding explicit styles for dark mode, it turns out that's
easier when we work more with css rules/classes instead of inline styles (so we
can use the @media rule).
so we now also create css rules instead of working with inline styles a lot.
benefits:
- creating css rules is useful for items that repeat. they'll have a single css
class. changing a style on a css class is now reflected in all elements of that
kind (with that class)
- css class names are helpful when inspecting the DOM while developing: they
typically describe the function of the element.
most css classes are defined near where they are used, often while making the
element using the class (the css rule is created on first use).
this changes moves colors used for styling to a single place in webmail/lib.ts.
each property can get two values: one for regular/light mode, one for dark mode.
that should prevent forgetting one of them and makes it easy to configure both.
this change sets colors for the dark mode. i think the popups look better than
in PR #163, but in other ways it may be worse. this is a start, we can tweak
the styling.
if we can reduce the number of needed colors some more, we could make them
configurable in the webmail settings in the future. so this is also a step
towards making the ui looks configurable as discussed in issue #107.
if the message has a list-id header, we assume this is a (mailing) list
message, and we require a dkim/spf-verified domain (we prefer the shortest that
is a suffix of the list-id value). the rule we would add will mark such
messages as from a mailing list, changing filtering rules on incoming messages
(not enforcing dmarc policies). messages will be matched on list-id header and
will only match if they have the same dkim/spf-verified domain.
if the message doesn't have a list-id header, we'll ask to match based on
"message from" address.
we don't ask the user in several cases:
- if the destination/source mailbox is a special-use mailbox (e.g.
trash,archive,sent,junk; inbox isn't included)
- if the rule already exist (no point in adding it again).
- if the user said "no, not for this list-id/from-address" in the past.
- if the user said "no, not for messages moved to this mailbox" in the past.
we'll add the rule if the message was moved out of the inbox.
if the message was moved to the inbox, we check if there is a matching rule
that we can remove.
we now remember the "no" answers (for list-id, msg-from-addr and mailbox) in
the account database.
to implement the msgfrom rules, this adds support to rulesets for matching on
message "from" address. before, we could match on smtp from address (and other
fields). rulesets now also have a field for comments. webmail adds a note that
it created the rule, with the date.
manual editing of the rulesets is still in the webaccount page. this webmail
functionality is just a convenient way to add/remove common rules.
the regular send shortcut is control+Enter. the shift enables "archive thread".
there is no configuration option, you'll always get the button, but only for
reply/forward, not for new compose.
we may do "send and move thread to thrash", but let's wait until people want it.
for github issue #135 by mattfbacon
when sending a message with bcc's, prepend the bcc header to the message we
store in the sent folder. still not in the message we send to the recipients.
for applications to compose/send messages, receive delivery feedback, and
maintain suppression lists.
this is an alternative to applications using a library to compose messages,
submitting those messages using smtp, and monitoring a mailbox with imap for
DSNs, which can be processed into the equivalent of suppression lists. but you
need to know about all these standards/protocols and find libraries. by using
the webapi & webhooks, you just need a http & json library.
unfortunately, there is no standard for these kinds of api, so mox has made up
yet another one...
matching incoming DSNs about deliveries to original outgoing messages requires
keeping history of "retired" messages (delivered from the queue, either
successfully or failed). this can be enabled per account. history is also
useful for debugging deliveries. we now also keep history of each delivery
attempt, accessible while still in the queue, and kept when a message is
retired. the queue webadmin pages now also have pagination, to show potentially
large history.
a queue of webhook calls is now managed too. failures are retried similar to
message deliveries. webhooks can also be saved to the retired list after
completing. also configurable per account.
messages can be sent with a "unique smtp mail from" address. this can only be
used if the domain is configured with a localpart catchall separator such as
"+". when enabled, a queued message gets assigned a random "fromid", which is
added after the separator when sending. when DSNs are returned, they can be
related to previously sent messages based on this fromid. in the future, we can
implement matching on the "envid" used in the smtp dsn extension, or on the
"message-id" of the message. using a fromid can be triggered by authenticating
with a login email address that is configured as enabling fromid.
suppression lists are automatically managed per account. if a delivery attempt
results in certain smtp errors, the destination address is added to the
suppression list. future messages queued for that recipient will immediately
fail without a delivery attempt. suppression lists protect your mail server
reputation.
submitted messages can carry "extra" data through the queue and webhooks for
outgoing deliveries. through webapi as a json object, through smtp submission
as message headers of the form "x-mox-extra-<key>: value".
to make it easy to test webapi/webhooks locally, the "localserve" mode actually
puts messages in the queue. when it's time to deliver, it still won't do a full
delivery attempt, but just delivers to the sender account. unless the recipient
address has a special form, simulating a failure to deliver.
admins now have more control over the queue. "hold rules" can be added to mark
newly queued messages as "on hold", pausing delivery. rules can be about
certain sender or recipient domains/addresses, or apply to all messages pausing
the entire queue. also useful for (local) testing.
new config options have been introduced. they are editable through the admin
and/or account web interfaces.
the webapi http endpoints are enabled for newly generated configs with the
quickstart, and in localserve. existing configurations must explicitly enable
the webapi in mox.conf.
gopherwatch.org was created to dogfood this code. it initially used just the
compose/smtpclient/imapclient mox packages to send messages and process
delivery feedback. it will get a config option to use the mox webapi/webhooks
instead. the gopherwatch code to use webapi/webhook is smaller and simpler, and
developing that shaped development of the mox webapi/webhooks.
for issue #31 by cuu508
- add option to put messages in the queue "on hold", preventing delivery
attempts until taken off hold again.
- add "hold rules", to automatically mark some/all submitted messages as "on
hold", e.g. from a specific account or to a specific domain.
- add operation to "fail" a message, causing a DSN to be delivered to the
sender. previously we could only drop a message from the queue.
- update admin page & add new cli tools for these operations, with new
filtering rules for selecting the messages to operate on. in the admin
interface, add filtering and checkboxes to select a set of messages to operate
on.
by explaining (in the titles/hovers) what the concepts and requirements are, by
using selects/dropdowns or datalist suggestions where we have a known list, by
automatically suggesting a good account name, and putting the input fields in a
more sensible order.
based on issue #132 by ally9335
the smtp extension, rfc 4865.
also implement in the webmail.
the queueing/delivery part hardly required changes: we just set the first
delivery time in the future instead of immediately.
still have to find the first client that implements it.
to start composing a message.
the help popup now has a button to register the "mailto:" links with the mox
webmail (typically only works over https, not all browsers support it).
the mailto links are specified in 6068. we support the to/cc/bcc/subject/body
parameters. other parameters should be seen as custom headers, but we don't
support messages with custom headers at all at the moment, so we ignore them.
we now also turn text of the form "mailto:user@host" into a clickable link
(will not be too common). we could be recognizing any "x@x.x" as email address
and make them clickable in the future.
thanks to Hans-Jörg for explaining this functionality.
before, we showed the xn-- ascii names, along with the unicode name. but users
of internationalized email don't want to see any xn-- names. we now put those
in an html title attribute for some cases, so you can still see them if you
really want to, by hovering.
after talking to arnt at fosdem.
the http basic auth we had was very simple to reason about, and to implement.
but it has a major downside:
there is no way to logout, browsers keep sending credentials. ideally, browsers
themselves would show a button to stop sending credentials.
a related downside: the http auth mechanism doesn't indicate for which server
paths the credentials are.
another downside: the original password is sent to the server with each
request. though sending original passwords to web servers seems to be
considered normal.
our new approach uses session cookies, along with csrf values when we can. the
sessions are server-side managed, automatically extended on each use. this
makes it easy to invalidate sessions and keeps the frontend simpler (than with
long- vs short-term sessions and refreshing). the cookies are httponly,
samesite=strict, scoped to the path of the web interface. cookies are set
"secure" when set over https. the cookie is set by a successful call to Login.
a call to Logout invalidates a session. changing a password invalidates all
sessions for a user, but keeps the session with which the password was changed
alive. the csrf value is also random, and associated with the session cookie.
the csrf must be sent as header for api calls, or as parameter for direct form
posts (where we cannot set a custom header). rest-like calls made directly by
the browser, e.g. for images, don't have a csrf protection. the csrf value is
returned by the Login api call and stored in localstorage.
api calls without credentials return code "user:noAuth", and with bad
credentials return "user:badAuth". the api client recognizes this and triggers
a login. after a login, all auth-failed api calls are automatically retried.
only for "user:badAuth" is an error message displayed in the login form (e.g.
session expired).
in an ideal world, browsers would take care of most session management. a
server would indicate authentication is needed (like http basic auth), and the
browsers uses trusted ui to request credentials for the server & path. the
browser could use safer mechanism than sending original passwords to the
server, such as scram, along with a standard way to create sessions. for now,
web developers have to do authentication themselves: from showing the login
prompt, ensuring the right session/csrf cookies/localstorage/headers/etc are
sent with each request.
webauthn is a newer way to do authentication, perhaps we'll implement it in the
future. though hardware tokens aren't an attractive option for many users, and
it may be overkill as long as we still do old-fashioned authentication in smtp
& imap where passwords can be sent to the server.
for issue #58
all ui frontend code is now in typescript. we no longer need jshint, and we
build the frontend code during "make build".
this also changes tlsrpt types for a Report, not encoding field names with
dashes, but to keep them valid identifiers in javascript. this makes it more
conveniently to work with in the frontend, and works around a sherpats
limitation.
i'm not sure this is good enough.
this is based on field MsgFromValidation, but it doesn't hold the full DMARC information.
we also don't know mailing list-status for all historic messages.
so the red underline can occur too often.
we were trying to offset the timezone, but that makes no sense: we already
created a date in the local timezone based on (milli)seconds passed. so we can
just use that date instead of calculating a wrong date.
