to compress the entire IMAP connection. tested with thunderbird, meli, k9, ios
mail. the initial implementation had interoperability issues with some of these
clients: if they write the deflate stream and flush in "partial mode", the go
stdlib flate reader does not return any data (until there is an explicit
zero-length "sync flush" block, or until the history/sliding window is full),
blocking progress, resulting in clients closing the seemingly stuck connection
after considering the connection timed out. this includes a coy of the flate
package with a new reader that returns partially flushed blocks earlier.
this also adds imap trace logging to imapclient.Conn, which was useful for
debugging.
so we can easily see the exact bytes on the wire, instead of having \n's
expanded as newlines. much easier to read. we had this in the past, but it must
have been lost in a refactor.
they are intended to be used by the server to automatically mark some messages
as important, based on server-defined heuristics. we don't have such heuristics
at the moment. perhaps in the future, but until then there are no plans.
we already supported special-use flags. settable through the webmail interface,
and new accounts already got standard mailboxes with special-use flags
predefined. but now the IMAP "CREATE" command implements creating mailboxes
with special-use flags.
it makes a new field available on stored messages. not when they they were
received (over smtp) or appended to the mailbox (over imap), but when they were
last "saved" in the mailbox. copy/move of a message (eg to the trash) resets
the "savedate" value. this helps implement "remove messages from trash after X
days".
logging of login attempts happens in the background, because we don't want to
block regular operation with disk since for such logging. however, when a line
is logged, we evaluate some attributes of a connection, notably the username.
but about when we do authentication, we change the username on a connection. so
we were reading and writing at the same time. this is now fixed by evaluating
the attributes before we pass off the logger to the goroutine.
found by the go race detector.
this allows setting per-mailbox and per-server annotations (metadata). we have
a fixed maximum for total number of annotations (1000) and their total size
(1000000 bytes). this size isn't held against the regular quota for simplicity.
we send unsolicited metadata responses when a connection is in the idle
command and a change to a metadata item is made.
we currently only implement the /private/ namespace. we should implement the
/shared/ namespace, for mox-global metadata annotations. only the admin should
be able to configure those, probably through the config file, cli, or admin web
interface.
for issue #290
intended for automated processors that don't want to send messages to senders
without verified domains (because the address may be forged, and the processor
doesn't want to bother innocent bystanders).
such delivery attempts will fail with a permanent error immediately, typically
resulting in a DSN message to the original sender. the configurable error
message will normally be included in the DSN, so it could have alternative
instructions.
accounts with this option enabled can only generate get a new randomly
generated password. this prevents password reuse across services and weak
passwords. existing accounts keep their current ability to set custom
passwords. only admins can change this setting for an account.
related to issue #286 by skyguy
all relevant systems nowadays should be accepting "8-bit" messages. before this
change, we would fail delivery for 8bit messages when the remote server doesn't
announce the 8bitmime smtp extension. even though that system would likely
just accept our message.
also, there's a good chance the non-8bitmime-supporting system is some
intermediate minimal mail server like openbsd spamd, which was fixed to
announce the 8bitmime extension in the past year.
in theory, we could rewrite the message to be 7bit-only if it is a mime
message. but it's probably not worth the trouble. also see
https://cr.yp.to/smtp/8bitmime.html
as alternative to PR #287 by mattanja (who also reported the issue on matrix),
thanks!
we use 6 weeks as the cutoff, but this is fuzzy, and will vary by mail
server/service provider.
we check the domain age using RDAP, the replacement for whois. it is a
relatively simple protocol, with HTTP/JSON requests. we fetch the
"registration"-related events to look for a date of registration.
RDAP is not available for all country-level TLDs, but is for most (all?) ICANN
global top level domains. some random cctlds i noticed without rdap: .sh, .au,
.io.
the rdap implementation is very basic, only parsing the fields we need. we
don't yet cache the dns registry bootstrap file from iana. we should once we
use this functionality from the web interface, with more calls.
and don't do needless normalization for the username we got from scram: the
scram package would have failed if the name wasn't already normalized.
unicode may not be specified for sasl with imap (i'm not sure), but there's no
point in accepting it over smtpserver but not in imapserver.
given the "false" flag above when opening the account by email.
the login disabled case is handled after the various auth mechanisms in a
single place.
noticed while making other changes.
and show them in the account and admin interfaces. this should help with
debugging, to find misconfigured clients, and potentially find attackers trying
to login.
we include details like login name, account name, protocol, authentication
mechanism, ip addresses, tls connection properties, user-agent. and of course
the result.
we group entries by their details. repeat connections don't cause new records
in the database, they just increase the count on the existing record.
we keep data for at most 30 days. and we keep at most 10k entries per account.
to prevent unbounded growth. for successful login attempts, we store them all
for 30d. if a bad user causes so many entries this becomes a problem, it will
be time to talk to the user...
there is no pagination/searching yet in the admin/account interfaces. so the
list may be long. we only show the 10 most recent login attempts by default.
the rest is only shown on a separate page.
there is no way yet to disable this. may come later, either as global setting
or per account.
broken in v0.0.14, probably when introducing the css variables.
i had noticed this issue at the time, and thought i fixed it, but clearly not.
for issue #278, reported by gdunstone
we were only properly parsing values of "<date>T<time>" or just "<time>".
so you could select a date in the form (or type it), but it would be treated as
just a word of text to search for in messages. so it would quietly do the wrong
thing.
before this, you could use the button at the top of the list of mailboxes to
create a submailbox somewhere, and you would have to specify the full path of
the new mailbox name. now you can just open up your Lists/.../ mailbox, and
create a mailbox below that hierarchy.
for admins to open an imap connection preauthenticated for an account (by address), also when
it is disabled for logins.
useful for migrations. the admin typically doesn't know the password of the
account, so couldn't get an imap session (for synchronizing) before.
tested with "mox localserve" and running:
mutt -e 'set tunnel="MOXCONF=/home/mjl/.config/mox-localserve/mox.conf ./mox admin imapserve mox@localhost"'
may also work with interimap, but untested.
i initially assumed imap would be done fully on file descriptor 0, but mutt
expects imap output on fd 1. that's the default now. flag -fd0 is for others
that expect it on fd0.
for issue #175, suggested by DanielG
to facilitate migrations from/to other mail setups.
a domain can be added in "disabled" mode (or can be disabled/enabled later on).
you can configure a disabled domain, but incoming/outgoing messages involving
the domain are rejected with temporary error codes (as this may occur during a
migration, remote servers will try again, hopefully to the correct machine or
after this machine has been configured correctly). also, no acme tls certs will
be requested for disabled domains (the autoconfig/mta-sts dns records may still
point to the current/previous machine). accounts with addresses at disabled
domains can still login, unless logins are disabled for their accounts.
an account now has an option to disable logins. you can specify an error
message to show. this will be shown in smtp, imap and the web interfaces. it
could contain a message about migrations, and possibly a URL to a page with
information about how to migrate. incoming/outgoing email involving accounts
with login disabled are still accepted/delivered as normal (unless the domain
involved in the messages is disabled too). account operations by the admin,
such as importing/exporting messages still works.
in the admin web interface, listings of domains/accounts show if they are disabled.
domains & accounts can be enabled/disabled through the config file, cli
commands and admin web interface.
for issue #175 by RobSlgm
useful when a catchall is configured, and messages to some address need to be
rejected.
would have been nicer if this could be part of a ruleset. but evaluating a
ruleset requires us to have the message (so we can match on headers, etc). but
we can't reject messages to individual recipients during the DATA command in
smtp. that would reject the entire delivery attempt.
for issue #156 by ally9335
e.g. which domain, account, address, alias, the error is about.
we were adding context some of the time. this introduces helpers for adding
errors that make it easier to add details to the error messages.
by storing them, a restore may need the -fix flag to become usable again.
it makes more sense to just skip these files. they are not part of the
consistent snapshot.
useful for new accounts. we don't want to start rejecting incoming messages for
having a score near 0.5 because of too little training material. we err on the
side of allowing messages in. the user will mark them as junk, training the
filter. once enough non-junk has come in, we'll start the actual filtering.
for issue #64 by x8x, and i've also seen this concern on matrix
