Commit Graph

135 Commits

Author SHA1 Message Date
Christian Hesse 589b0733d9 Settings: set ok when reading configuration from sysconfdir
Without this htoprc from sysconfdir is ignored and default meters
are loaded.
2021-09-10 08:58:58 +02:00
Nathan Scott c9b58c7fbe Add missing end-of-line to htoprc file version mismatch warning 2021-09-08 12:13:56 +10:00
Christian Göttsche 0925c54caa Drop redundant semicolons 2021-09-04 14:17:37 +02:00
Christian Göttsche b85b718e69 Settings: enclose casted macro argument in parenthesis 2021-09-04 09:48:53 +02:00
Christian Göttsche 7891cdc552 Reduce variable scope
Also avoid declaring variables of different type, pointer and array, in
the same line.
2021-09-04 09:48:53 +02:00
Christian Göttsche becd33795c Settings: create default meters on no existing config file
If htop is started for the first time and no configuration file exists
the header is empty cause no meters are added as a default.

Add the default meters if parsing all available configuration paths
failed.
2021-09-02 08:03:21 +02:00
Nathan Scott b81bb9038c Fix resource leaks dealing with unrecognised config file version
Plug leaks of an open file descriptor and dynamically allocated
'option' when we bail out early reading unknown config version.
2021-08-31 08:08:01 +02:00
Christian Göttsche 4ed3ab5c2c Shorten crash output to fit on screen 2021-08-26 14:09:39 +02:00
Christian Göttsche 2bf626c4e4 IWYU update 2021-08-25 09:54:30 +02:00
Christian Göttsche db076b9c8e HeaderLayout: save name in configuration
Use a name in the user configuration file instead of the compile
time enum value, so that future reorderings or insertions do not change
the user selected layout.
2021-08-24 20:27:59 +02:00
Daniel Lange ec2307688e Merge branch 'header_fmt' of cgzones/htop 2021-08-23 14:56:05 +02:00
Daniel Lange 6d10736a64 Merge branch 'config_versions' of fasterit/htop 2021-08-23 14:53:24 +02:00
Daniel Lange 35d94a5ae5 Apply approved warning message suggested by nathans 2021-08-23 08:58:14 +02:00
Christian Göttsche 9060a4179d Add option to change Header layout 2021-08-22 16:15:59 +02:00
Daniel Lange a9ddaccc63 Merge branch 'read-settings-defaults' of bjpbakker/htop 2021-08-18 14:47:16 +02:00
Daniel Lange 4b59a2e6b7 Introduce versioned config files and config_reader_min_version 2021-08-13 23:21:54 +02:00
Sohaib Mohamed 6f2021f3d9 PCP: support for 'dynamic columns' added at runtime
Implements support for arbitrary Performance Co-Pilot
metrics with per-process instance domains to form new
htop columns.  The column-to-metric mappings are setup
using configuration files which will be documented via
man pages as part of a follow-up commit.

We provide an initial set of column configurations so
as to provide new capabilities to pcp-htop: including
configs for containers, open fd counts, scheduler run
queue time, tcp/udp bytes/calls sent/recv, delay acct,
virtual machine guests, detailed virtual memory, swap.

Note there is a change to the configuration file path
resolution algorithm introduced for 'dynamic meters'.
First, look in any custom PCP_HTOP_DIR location.  Then
iterate, in priority order, users home directory, then
local sysadmins files in /etc/pcp/htop, then readonly
configuration files below /usr/share/pcp/htop.  This
final location becomes the preferred place for our own
shipped meter and column files.

The Settings file (htoprc) writing code is updated to
not using the numeric identifier for dynamic columns.
The same strategy used for dynamic meters is used here
where we write Dynamic(name) so the name can be setup
once more at start.  Regular (static) columns writing
to htoprc - i.e. numerically indexed - is unchanged.
2021-08-13 07:32:57 +02:00
Bart Bakker c1c4b5a1ab
Read settings after applying defaults
Default settings are used as a base and only settings specified in `htoprc` are
applied on top of it. This patch removes the special case for applying some
defaults  when the config does not contain a `meters` key. All defauls are set
before any attempt to read settings, so only keys actually present in the config
file are overridden.
2021-08-02 17:33:34 +02:00
nia e8f27ebc26 Disable mouse option when support is unavailable 2021-07-15 19:09:08 +02:00
Benny Baumann 0d85af2872 Whitespace around operators 2021-07-15 06:57:24 +02:00
Benny Baumann bf07c713ba Allow for highlighting of deleted executables to be configured
Fixes #383
2021-05-23 09:30:36 +02:00
Christian Göttsche 1f5f40c091 Print current settings on crash 2021-05-16 19:55:31 +02:00
Christian Göttsche 36880cd61c Add read-only option
Add command line option to disable all system and process changing
features.
2021-04-14 17:21:43 +02:00
Christian Göttsche a11d01568c Use unsigned types for CPU counts and associated variables 2021-03-19 23:30:54 +01:00
Graham Inggs ee97916fd5
Merge pull request #436 from cgzones/freebsd
FreeBSD: add support for CPU frequency and temperature
Tested on two physical systems running FreeBSD 12.1
2021-03-18 14:03:51 +02:00
Christian Göttsche 1275139795 Settings_write: fix return value on error
Return a negative errno on fprintf() or flcose() failure, not a return
value of ferror() or flcose().
2021-03-13 18:15:20 +01:00
Christian Göttsche 521f1343e3 Settings: check if writing configuration file was successful
Writing to the file stream might fail due to a immutable file or a
filesystem error.
Check the error indicator for the stream and for fclose() failures.
2021-03-12 16:56:06 +01:00
Christian Göttsche c38819a675 Settings: mark non-modified pointer parameters const 2021-03-12 16:48:41 +01:00
Benny Baumann 82157f598e Refactor to remove no-op calls
This removes the call-sites of the removed setuid feature
2021-02-17 15:59:50 +01:00
Daniel Lange 2c6222e30a Option and key ("*") to collapse / expand all branches under PID 1
(and PID 2 if kernel threads are shown)

Based on hishamhm/htop#510 by Krishna Chaitanya, B
Closes #68
2021-02-13 16:47:04 +01:00
Christian Göttsche fd2a0cf421 FreeBSD: add support for CPU frequency and temperature 2021-02-05 16:32:25 +01:00
Daniel Lange 8fb51627b2 Improve initial setup for systems with many CPUs
Resolves #435
2021-02-02 18:03:17 +01:00
Christian Göttsche 8bd543562b Quote SYSCONFDIR definition
As SYSCONFDIR is a compile time string literal, use compile time string
concatenation instead of a runtime one.

Also drop related TODO, cause we indeed using the correct way of getting
$sysconfdir from autoconf
2021-01-31 21:44:34 +01:00
Christian Göttsche 0f04714a03 Fix possible division by zero
Do not pass a nmemb of 0 to calloc, cause it's unportable and forbidden
with our wrapper.

Found by Coverity
2021-01-25 17:33:29 +01:00
Daniel Lange 4531b31d92 Sort out the mess around column sorting that had accumulated over time 2021-01-21 14:27:23 +01:00
Christian Göttsche d72b0a682e Mark several non-modified pointer variables const 2021-01-11 20:12:34 +01:00
Christian Göttsche a3cced9fb6 Add option to hide the Function Bar
Support three settings:
  - Always show Function Bar
  - Always hide the Function Bar, except in Infoscreens (Env/Locks...)
    and when editing the search and filter mode
  - Hide the Function Bar on ESC until the next user input

Closes: #439
2021-01-04 23:12:43 +01:00
Christian Göttsche f614b8a19f Mark Platform_defaultFields const 2020-12-19 21:13:32 +01:00
Christian Göttsche 89473cc9ae Rework enum ProcessField
Use only one enum instead of a global and a platform specific one.
Drop Platform_numberOfFields global variable.
Set known size of Process_fields array
2020-12-19 21:13:32 +01:00
Hisham Muhammad 2327260ee8 Separate tree and list sort orders
Implements the suggestion from https://github.com/htop-dev/htop/issues/399#issuecomment-747861013

Thanks to the refactors from 0bd5c8fb5da and 6393baa74e5, this was really easy
and clean to do.

It maintains the "Tree view always by PID" option in the Settings, which
results in some specific behaviors such as "clicking on the column header to
exit tree view" and "picking a new sort order to exit tree view", for the sake
of the muscle memory of long time htop users. :)
2020-12-19 16:02:34 +01:00
Hisham Muhammad e8c6994f40 Add "Tree view is always sorted by PID" option to mimic htop 2 behavior 2020-12-19 16:02:34 +01:00
Christian Göttsche b76eaf187a Dynamically load libsensors at runtime 2020-12-02 21:03:24 +01:00
Fynn Wulf 7f18b352b0 Calculate library size (M_LRS column) from maps file 2020-11-26 22:58:34 +01:00
Christian Göttsche 267014cbfe Add support to change numeric options in settings screen
Like delay or highlightDelaySecs
2020-11-25 20:46:27 +01:00
Narendran Gopalakrishnan 09fe94da18 Improving Command display/sort 2020-11-24 19:05:48 +01:00
Christian Göttsche 1b225cd7a0 Show CPU temperature in CPU meter
Show the CPU temperature in the CPU meter, like CPU frequency, instead
of using an extra Meter.
2020-11-16 16:38:54 +01:00
Daniel Lange 0951090fa4 Merge branch 'hili-new-old' of adsr/htop into highlight-new-old-processes 2020-11-16 12:55:07 +01:00
Christian Göttsche ad72b747fa Drop hideThreads Setting
It is only used to read process directories on RedHat beginning with a dot.
Unconditionally accept directories with a starting dot.
2020-11-15 22:54:14 +01:00
Benny Baumann 45869513bf Embracing branches 2020-11-02 22:15:01 +01:00
Benny Baumann 61e14d4bb2 Spacing around operators 2020-11-02 22:15:01 +01:00