Commit Graph

2609 Commits

Author SHA1 Message Date
Christian Göttsche 6388033e10 configure: support libunwind of LLVM
The libunwind headers of LLVM are located in the subdirectory
/usr/include/libunwind. Search that subdirectory when the default
header test fails. Also extend the include path due to the transitive
include of `<__libunwind_config.h>`.

Closes: #894
2021-12-16 17:51:15 +01:00
Christian Göttsche b45eaf2fe1 Hashtable: use a minimum size of 7
With a size of 2 or 3 the grow factor does not reach 70% for one empty
entry. This will cause the following assert violation:

    htop: Hashtable.c:236: void Hashtable_put(Hashtable *, ht_key_t, void *): Assertion `this->size > this->items' failed.
2021-12-13 21:17:58 +01:00
Denis Lisov 230dc9c3c1 Hashtable: adjust shrink-on-remove factor
Due to the use of prime numbers Hashtable_remove used to never shrink
from some sizes. For example, a size 8191 hashtable would try to shrink
to 4095, which nextPrime would round back to 8191 instead of the
intended 4093. A factor of 3 is enough to allow every prime size used to
shrink to the previous one.
2021-12-13 21:05:22 +01:00
Denis Lisov d084a80023 Hashtable: skip rehashing if the size is the same
Hashtable_setSize should not rehash if the actual size stays the same as
the number of buckets and natural positions stay the same too.
2021-12-13 21:05:22 +01:00
Christian Göttsche 5c8670717a Do not leave empty last column in header
Do not leave empty last column in header meters by refactoring the width
and separator logic.

Closes: #784
2021-12-09 17:52:00 +01:00
Nathan Scott bc08c7dc2a
Merge pull request #889 from cgzones/screens_update
Screens update
2021-12-09 08:38:25 +11:00
Christian Göttsche 1e94b92226 Linux: read generic sysfs batteries
Not all batteries entries in /sys/class/power_supply start with either
BAT or AC, but might have device specific names, e.g. CMB1.
Detect the types of those entries and parse them accordingly.

Closes: #881
Fixes: 3e70de64 ("Code clean up for reading battery info")
2021-12-08 20:50:11 +01:00
Christian Göttsche 63fafb4844 IOMeters: rework initial display
Show a non highlighted string at the start of htop, not the failure
text.
Also the original fix only handled the text mode, not the bar mode.

Improves: 2977414d ("Discard stale information from DiskIO and NetworkIO meters")
Related: #860
2021-12-08 19:08:20 +01:00
Christian Göttsche c85e5bbf5c ScreenPanels: free ScreenSettings of deleted screens 2021-12-08 16:34:15 +01:00
Christian Göttsche c9e0bd2002 ScreenPanel: misc updates
- use ASCII escape sequences
- use array allocation wrappers
2021-12-08 16:34:15 +01:00
Christian Göttsche df1914f429 Add ScreenSettings_delete helper 2021-12-08 16:34:15 +01:00
Christian Göttsche 3cfdf66d9a Settings: initialize default sort key for new screenpanel
Use C99 struct initialization, which also makes using calloc redundant.

htop: Process.c:1179: int Process_compareByKey_Base(const Process *, const Process *, ProcessField): Assertion `0 && "Process_compareByKey_Base: default key reached"' failed.
2021-12-08 14:55:14 +01:00
Christian Göttsche fa9f260f63 Process: print default key 2021-12-08 14:48:20 +01:00
Christian Göttsche 1da78b5818 CRT: add debug printing function 2021-12-08 14:48:20 +01:00
Christian Göttsche 2ae1906479 Panel: initialize cursorOn member
Panel.c:496:14: runtime error: load of value 190, which is not a valid value for type 'bool'
2021-12-08 12:40:13 +01:00
Nathan Scott 0e58784224 Fix memory leak on shutdown in new screen settings code.
Also tidy up the calloc call parameters in the initial allocation
of this pointer, thanks to @BenBE for noticing.
2021-12-07 17:04:49 +11:00
Sohaib Mohamed 4ef5e4296e fix CI issue
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
2021-12-07 17:04:49 +11:00
Sohaib Mohamed ba3a1df806 Fix misc styleguide issues and add missing header files
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
2021-12-07 17:04:49 +11:00
Sohaib Mohamed b672e60886 Enable tabs for a fresh install of htop Only
If the new htop is configured with htoprc having no tabs (eg on upgrade)
then the interface will not automatically introduce/enable them.
However, for a fresh install of htop, enabling them automatically

Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
2021-12-07 17:04:49 +11:00
Sohaib Mohamed cd6457ef88 Fixup tabs with dynamic Columns - add missing `Dynamic()` 2021-12-07 17:04:49 +11:00
Sohaib Mohamed 31fe29c5a7 Pass correct ColorElements values to Panel_setSelectionColor 2021-12-07 17:04:49 +11:00
Nathan Scott cc2547fcf0 Improvements to the tab code after initial feedback 2021-12-07 17:04:49 +11:00
Hisham Muhammad 72ba20fa5f Introduce screen tabs
This is a forward port (by nathans) of Hisham's original code.
2021-12-07 17:04:49 +11:00
Christian Göttsche ff4f44b22a Pre-select the last sent signal in SignalsPanel
Instead of pre-selecting SIGTERM every time, select the signal last
send in the same htop session.

Closes: #862
2021-12-05 19:36:36 +01:00
Christian Göttsche a38f48481e Process: highlight UNINTERRUPTIBLE_WAIT state (D)
Commit d8dfbbd3 ("Tidy up process state handling") did change the
highlighting of the UNINTERRUPTIBLE_WAIT state (D) from red to gray.
As this state might means the process probably still has work to do and
can hint at bottlenecks, revert this particular change.

Fixes: d8dfbbd3 ("Tidy up process state handling")
2021-12-05 19:29:10 +01:00
Christian Göttsche 61c9fe44a3 CGroupUtils: avoid unsigned integer underflow
Do not underflow count at the last iteration, which triggers UBSAN when
using -fsanitize=unsigned-integer-overflow. This is useful as those
underflows can be a result of a flawed counting logic (e.g. a counter
gets reduced more than increased).
2021-12-05 19:28:07 +01:00
Emmanuel Mathi-Amorim ff0ea41c86 Fix issue where last line is not cleared when SIGINT is received
When we close the application using the quit function F10, the last line
is cleared so that on terminals which do not support ALTBUF the last
line is not clobbered. This do not happen when the application exits as
a result of a signal (SIGINT,SIGTERM,SIGQUIT).

Move the logic to clear the last line into the CRT_done function. This
ensures that it will be executed when the CRT_handleSIGTERM is called.
2021-12-01 17:08:13 +01:00
Nathan Scott 43e9be5a8f Update version number to 3.2.0-dev to identify git repo builds 2021-11-30 12:10:54 +11:00
Nathan Scott d73783d6db Release 3.1.2 2021-11-30 12:03:21 +11:00
Nathan Scott 89b7c4c9f9 Merge branch 'release_action' of https://github.com/rofl0r/htop into rofl0r-release_action 2021-11-30 11:16:57 +11:00
Nathan Scott 78aefc2a99 Minor typo fix and wordsmith-ing in the changelog 2021-11-30 11:15:35 +11:00
Benny Baumann 697c502b7e Update changelog to include recent changes 2021-11-28 23:34:41 +01:00
Lutz Mader 171aa0faaa Add a fix to use gettimeofday if monotonic is not available. 2021-11-28 23:13:46 +01:00
Peter VandeHaar ddfacb8694 Get file size using stat() for OpenFilesScreen if missing from lsof 2021-11-28 20:32:02 +01:00
Peter VandeHaar 5beef3e737 Strip prefix "0t" from OFFSET column of OpenFilesScreen 2021-11-28 20:32:02 +01:00
Peter VandeHaar 27a18830d5 Add OFFSET column to OpenFilesScreen 2021-11-28 20:32:02 +01:00
Benny Baumann b98a4f8d56 Include support for legacy LXC cgroup naming 2021-11-28 20:19:10 +01:00
Benny Baumann 55e073a455 Use helpers for parsing of cgroup labels 2021-11-28 20:19:10 +01:00
Benny Baumann 915b558bbe Document CCGROUP column 2021-11-28 20:19:10 +01:00
Benny Baumann 550100327b Extract string writing/buffer handling into some callback 2021-11-28 20:19:10 +01:00
Benny Baumann 9dc964bb42 Compress cgroup names based on some heuristics 2021-11-28 20:19:10 +01:00
Benny Baumann ea4282784d Filter leading colons in CGROUP name 2021-11-28 20:19:10 +01:00
Benny Baumann 1c3c149d20 Ensure maximum width for CGROUP column 2021-11-28 20:19:10 +01:00
rofl0r 42c0493021 add github workflow to build release tarball 2021-11-23 16:29:25 +00:00
Guillaume Gomez 1284ab4835 Reduce allocation size of cp_time_n and cp_time_o on FreeBSD and DragonFlyBSD 2021-11-19 12:46:48 +01:00
Rin Cat (鈴猫) 07496eafb0 Linux: use proper way to detect kernel threads
Use PF_KTHREAD flag in /proc/[pid]/stat to detect kernel threads.
This fixed an issue when a process's cmdline is empty, htop think
it is a kernel thread.
2021-11-09 19:04:25 +01:00
Nathan Scott e7a8d14cbd Correct the order of xCalloc parameters in a couple of places
No functional change.  Thanks to @BenBE for pointing these out.
2021-11-05 09:22:09 +11:00
Sohaib Mohamed 21cb1c4d59 Cleanup: Fix misc styleguide issues
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
2021-11-04 23:13:38 +01:00
Nathan Scott e64269df2c Fix process state handling compiler warning on PCP platform 2021-11-03 15:46:20 +11:00
marcluque d8dfbbd37c Tidy up process state handling 2021-11-02 20:02:54 +01:00