By storing the per-process m_resident and m_virt values in the form
htop wants to display them in (KB, not pages), we no longer need to
have definitions of pageSize and pageSizeKB in the common CRT code.
These variables were never really CRT (i.e. display) related in the
first place. It turns out the darwin platform code doesn't need to
use these at all (the process values are extracted from the kernel
in bytes not pages) and the other platforms can each use their own
local pagesize variables, in more appropriate locations.
Some platforms were actually already doing this, so this change is
removing duplication of logic and variables there.
linux/LinuxProcessList.c:1403:63: runtime error: division by zero
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:1403:63 in
The global ProcessList structure contains a couple of unused
fields. 'sharedMem' has never been used by any Meter, since
its not been anything other than zero in Linux /proc/meminfo
for many, many years. The freeMem field is only used in the
usedMem calculation, so it can reside on the stack like some
other memory variables used within-calculations-only and not
exposed to the user via a Meter.
taskstats is only checked on runtime if the column RCHAR, WCHAR, SYSCR,
SYSCW, RBYTES, WBYTES, CNCLWB, IO_READ_RATE, IO_WRITE_RATE or IO_RATE is
selected.
taskstats is currently enabled by default.
Drop the taskstats configuration switch, to reduce the maintenance cost.
cgroup is only checked on runtime if the column CGROUP is selected.
cgroup is currently disabled by default, but most distributions do
enable it.
Drop the cgroup configuration switch, to reduce the maintenance cost.
- allow count out-parameter of String_split() to be NULL
- introduce xStrndup()
- do not allow NULL pointers passed to String_eq()
it is not used in any code
- implement String_startsWith(), String_contains_i() and String_eq()
as inline header functions
- adjust several conversion issues
Generic data, as CPU and memory usage, are used by Meters.
In paused mode they would stop receiving updates and especially Graph
Meters would stop showing continuous data.
Improves: #214Closes: #253
man:sysconf(3) states:
The values obtained from these functions are system configuration constants.
They do not change during the lifetime of a process.
Reported by UB sanitizer (alongside several other messages):
linux/LinuxProcessList.c:782:25: runtime error: member access within misaligned address 0x614000000264 for type 'struct taskstats', which requires 8 byte alignment
0x614000000264: note: pointer points here
64 01 03 00 0a 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 4b c8 2e 00 00 00 00 00 3e 45 3c fd
^
The issue doesn't cause trouble on x86, but any architecture with stricter memory alignment requirements may inadvertedly break.
Use NDEBUG conditional instead of DEBUG.
Do not call static functions in extern inline ones.
Vector.c:67:11: error: static function 'Vector_isConsistent' is used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
Use the more portable sysfs node /sys/devices/system/cpu/cpuX/cpufreq/scaling_cur_freq
to get the CPU frequency.
In case of an error fall back to /proc/cpuinfo .
Also use a fixed width of 4 for the frequency to avoid position jumps
in case the frequency moves in the range 900-1100 MHz.
unsigned overflow is well defined, but creates noise when using
sanitizers. unsigned overflow can be a symptom of logic issues of
counter, so its reasonable to use.
linux/LinuxProcessList.c:64:50: runtime error: unsigned integer overflow: 0 - 1 cannot be represented in type 'unsigned int'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:64:50 in
linux/LinuxProcessList.c:64:11: runtime error: implicit conversion from type 'unsigned int' of value 4294967295 (32-bit, unsigned) to type 'int' changed the value to -1 (32-bit, signed)
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:64:11 in
linux/LinuxProcessList.c:64:78: runtime error: unsigned integer overflow: 4 - 136 cannot be represented in type 'unsigned int'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:64:78 in
The MIN, MAX, CLAMP, MINIMUM, and MAXIMUM macros appear
throughout the codebase with many re-definitions. Make
a single copy of each in a common header file, and use
the BSD variants of MINIMUM/MAXIMUM due to conflicts in
the system <sys/param.h> headers.
Reasoning:
- implementation was unsound -- broke down when I added a fairly
basic macro definition expanding to a struct initializer in a *.c
file.
- made it way too easy (e.g. via otherwise totally innocuous git
commands) to end up with timestamps such that it always ran
MakeHeader.py but never used its output, leading to overbuild noise
when running what should be a null 'make'.
- but mostly: it's just an awkward way of dealing with C code.
If no pools are imported (ARC size == 0) or the
ZFS module is not in the kernel (/proc/spl/kstat/zfs/arcstats
does not exist), then the Meter reports "Unavailable".
this way a remount of /proc will not reset starttimes
and we can also see startup times for processes started before the mount
of /proc
also record btime (boot time in seconds since epoch) as Linux semi-global
glibc 2.28 no longer defines 'major' and 'minor' in <sys/types.h> and
requires us to include <sys/sysmacros.h>. (glibc 2.25 starts
deprecating the macros in <sys/types.h>.) Now do include the latter if
found on the system.
At the moment, let's also utilize AC_HEADER_MAJOR in configure script.
However as Autoconf 2.69 has not yet updated the AC_HEADER_MAJOR macro
to reflect the glibc change [1], so add a workaround code.
Fixes#663. Supersedes pull request #729.
Reference:
[1] https://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=e17a30e987d7ee695fb4294a82d987ec3dc9b974
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
The "if" tests if the character at index "5" is 'r', as a first quick
check. However at index "5" will always be a colon ":". This patch fixes
the off-by-one error. htop now shows proper values in the RD_SYSC
column.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Adds support for showing columns with linux delay accounting.
This information can be read from the netlink interface, and thus we set up a socket to read from that when initializing the LinuxProcessList (LinuxProcessList_initNetlinkSocket). After that, for each process we call LinuxProcessList_readDelayAcctData, which sends a message thru the socket after setting up a callback to get the answer from the Kernel. That callback sets the process total delay time attribute. We then set the delay percent as the percentage of time process cpu time since last scan.
Once a process goes zombie on Linux, /proc/PID/cmdline
gets empty. So, when we detect it is a zombie we stop
reading this file.
For processes that were zombies before htop started,
there's no way to get the full name.
Closes#49.
With the CLAMP macro replacing the combination of MIN and MAX, we will
have at least two advantages:
1. It's more obvious semantically.
2. There are no more mixes of confusing uses like MIN(MAX(a,b),c) and
MAX(MIN(a,b),c) and MIN(a,MAX(b,c)) appearing everywhere. We unify
the 'clamping' with a single macro.
Note that the behavior of this CLAMP macro is different from
the combination `MAX(low,MIN(x,high))`.
* This CLAMP macro expands to two comparisons instead of three from
MAX and MIN combination. In theory, this makes the code slightly
smaller, in case that (low) or (high) or both are computed at
runtime, so that compilers cannot optimize them. (The third
comparison will matter if (low)>(high); see below.)
* CLAMP has a side effect, that if (low)>(high) it will produce weird
results. Unlike MIN & MAX which will force either (low) or (high) to
win. No assertion of ((low)<=(high)) is done in this macro, for now.
This CLAMP macro is implemented like described in glib
<http://developer.gnome.org/glib/stable/glib-Standard-Macros.html>
and does not handle weird uses like CLAMP(a++, low++, high--) .
Nathan Scott