Title width of "CPUD%" and "SWAPD%" is 5 and there value cannot go
beyond "100.0%", so increase their field width to 5.
"IOD%" is similar to "MEM%" column, title width is 4 and maximum value
cannot go beyond "100.0%". So in case of "IOD%" column, there is no need
to increase title width to "5". "Process_printPercentage()" function
will handle the maximum value case, it will display value beyond "99.9%"
as "100" instead of "100.0".
Since commit edf319e[1], we're dynamically adjusting column width of
"CPU%", showing single digit precision also for values greater than
"99.9%" makes "CPU%" column consistent with all other values.
[1]: edf319e53d
Change "Process_printPercentage()" function's logic to always display
value (i.e. "val") with single precision. Except when value is greater
than "99.9%" for columns like "MEM%", whose width is fixed to "4" and
value cannot go beyond "100%".
Credits: @Explorer09, thanks for the patch[2] to fix title alignment
issue.
[2]: https://github.com/htop-dev/htop/pull/959#issuecomment-1092480951Closes: #957
While most Unix-like systems use 16-bit user IDs,
Linux supports 32-bit UIDs since version 2.6.
UIDs above 65535 are used for UID namespacing of containers,
where a container has its own set of 16-bit user IDs.
Processes in such containers will have (much) larger UIDs than 65535.
Because the current format strings for `ST_UID` and `USER`
are `%5d` and `%9d` respectively, processes with such UIDs
lead to misaligned columns.
Dynamically scale the `ST_UID` column and increase the size of `USER`
to 10 characters (length of UINT32_MAX) to ensure that the user ID always fits.
Additionally: clean up how the titlebuffer size calculation and ensure
the PID column has a minimum size of 5.
This situation can arise if pcp-htop screen is resized right
at the same time sampling from pmcd(1) is happening. Have a
couple more goes at it before giving up entirely; once there
is no data available though we cannot proceed into accessing
the sample result data structure (segv will result) so a new
short-circuit guard is added there also.
In case the executable is an empty string, e.g. if pcp is run by an
unprivileged user, do not set procExe to an empty value, which breaks
the formatting of the PROCEXE column and the merged-cmdline logic.
This cannot be negative in these code locations, but for the
purposes of static checking like Coverity scan make it clear
and used the same unsigned type as ProcessList.h for the CPU
count variable (matching PL activeCPUs and existingCPUs).
This cannot happen in these code locations, but for the purposes
of static checkers like Coverity scan (and for future proofing),
add two more guards on NULL hash table entry pointers.
Implements support for arbitrary Performance Co-Pilot
metrics with per-process instance domains to form new
htop columns. The column-to-metric mappings are setup
using configuration files which will be documented via
man pages as part of a follow-up commit.
We provide an initial set of column configurations so
as to provide new capabilities to pcp-htop: including
configs for containers, open fd counts, scheduler run
queue time, tcp/udp bytes/calls sent/recv, delay acct,
virtual machine guests, detailed virtual memory, swap.
Note there is a change to the configuration file path
resolution algorithm introduced for 'dynamic meters'.
First, look in any custom PCP_HTOP_DIR location. Then
iterate, in priority order, users home directory, then
local sysadmins files in /etc/pcp/htop, then readonly
configuration files below /usr/share/pcp/htop. This
final location becomes the preferred place for our own
shipped meter and column files.
The Settings file (htoprc) writing code is updated to
not using the numeric identifier for dynamic columns.
The same strategy used for dynamic meters is used here
where we write Dynamic(name) so the name can be setup
once more at start. Regular (static) columns writing
to htoprc - i.e. numerically indexed - is unchanged.
Adds AGRP (autogroup) and ANI (autogroup nice) columns that
report the information from /proc/PID/autogroup, as well as
handlers for '{' and '}' to change the autogroup nice value.
This is guarded by /proc/sys/kernel/sched_autogroup_enabled
such that sampling and/or changing values wont be attempted
unless the kernel feature is enabled.
Fixes: #720
Currently htop does not support offline CPUs and hot-swapping, e.g. via
echo 0 > /sys/devices/system/cpu/cpu2/online
Split the current single cpuCount variable into activeCPUs and
existingCPUs.
Supersedes: #650
Related: #580
It can happen that pcp-htop is presented multiple definitions
of the same dynamic meter, e.g. if /etc/pcp/htop/meters has a
definition matching one in ~/.config/htop/meters - instead of
exiting with a duplicate metric error provide more meaningful
diagnostics (on close) and also just skip over such entries.
System files override home directories which overrides those
found below the current working directory.
Also fix the derived metric error diagnostic; because this is
using CRT_fatalError, which is like perror(3), we must give a
meaningful prefix (like program name) at the string end.
Several improvements to the way values are displayed in the
PCP platform DynamicMeter implementation:
- handle the initial 'caption' setting as with regular meters,
this required a new meter callback because we no longer have
just a single meter caption for the DynamicMeter case
- if no label is provided for a metric in a configuration file
use the short form metric name as a fallback
- honour the suffix setting in the configuration file
- convert metric values to the canonical units for htop (kbyte
and seconds), and use Meter_humanUnit when it makes sense to
do so.
Also improves the handling of fatal string error messages in a
couple of places, thanks to BenBE for the review feedback.
This commit is based on exploratory work by Sohaib Mohamed.
The end goal is two-fold - to support addition of Meters we
build via configuration files for both the PCP platform and
for scripts ( https://github.com/htop-dev/htop/issues/526 )
Here, we focus on generic code and the PCP support. A new
class DynamicMeter is introduced - it uses the special case
'param' field handling that previously was used only by the
CPUMeter, such that every runtime-configured Meter is given
a unique identifier. Unlike with the CPUMeter this is used
internally only. When reading/writing to htoprc instead of
CPU(N) - where N is an integer param (CPU number) - we use
the string name for each meter. For example, if we have a
configuration for a DynamicMeter for some Redis metrics, we
might read and write "Dynamic(redis)". This identifier is
subsequently matched (back) up to the configuration file so
we're able to re-create arbitrary user configurations.
The PCP platform configuration file format is fairly simple.
We expand configs from several directories, including the
users homedir alongside htoprc (below htop/meters/) and also
/etc/pcp/htop/meters. The format will be described via a
new pcp-htop(5) man page, but its basically ini-style and
each Meter has one or more metric expressions associated, as
well as specifications for labels, color and so on via a dot
separated notation for individual metrics within the Meter.
A few initial sample configuration files are provided below
./pcp/meters that give the general idea. The PCP "derived"
metric specification - see pmRegisterDerived(3) - is used
as the syntax for specifying metrics in PCP DynamicMeters.
Kumar