taskstats is only checked on runtime if the column RCHAR, WCHAR, SYSCR,
SYSCW, RBYTES, WBYTES, CNCLWB, IO_READ_RATE, IO_WRITE_RATE or IO_RATE is
selected.
taskstats is currently enabled by default.
Drop the taskstats configuration switch, to reduce the maintenance cost.
cgroup is only checked on runtime if the column CGROUP is selected.
cgroup is currently disabled by default, but most distributions do
enable it.
Drop the cgroup configuration switch, to reduce the maintenance cost.
Move platform-specific code out of the htop.c main function
and into the platform sub-directories - primarily this is
the Linux procfs path check and sensors setup/teardown; not
needed on any other platforms. No functional changes here.
If currently two unsigned values are compared via `a - b`, in the case b
is actually bigger than a, the result will not be an negative number (as
-1 is expected) but a huge positive number as the subtraction is an
unsigned subtraction.
Avoid over-/underflow affected operations; use comparisons.
Modern compilers will generate sane code, like:
xor eax, eax
cmp rdi, rsi
seta al
sbb eax, 0
ret
- Add Settings forward declaration in Process.h
- Add assert.h include in XUitls.c
- Add conditional stdbool.h include in Object.h
- Drop unneeded stddef.h include in Richstring.c
- Drop unneeded unistd.h include in Process.h
- Drop unneeded string.h include in linux/Platform.c
- Use String_eq to avoid string.h include in Action.c
- Improve script to run custom iwyu version
- allow count out-parameter of String_split() to be NULL
- introduce xStrndup()
- do not allow NULL pointers passed to String_eq()
it is not used in any code
- implement String_startsWith(), String_contains_i() and String_eq()
as inline header functions
- adjust several conversion issues
Generic data, as CPU and memory usage, are used by Meters.
In paused mode they would stop receiving updates and especially Graph
Meters would stop showing continuous data.
Improves: #214Closes: #253
man:sysconf(3) states:
The values obtained from these functions are system configuration constants.
They do not change during the lifetime of a process.
Reported by UB sanitizer (alongside several other messages):
linux/LinuxProcessList.c:782:25: runtime error: member access within misaligned address 0x614000000264 for type 'struct taskstats', which requires 8 byte alignment
0x614000000264: note: pointer points here
64 01 03 00 0a 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 4b c8 2e 00 00 00 00 00 3e 45 3c fd
^
The issue doesn't cause trouble on x86, but any architecture with stricter memory alignment requirements may inadvertedly break.
Add a date meter and sort header and source files in Makefile
Change the lists of header and source files sorted alphabetical and one
file per line. This way diffs become better readable and merges easier.
Use NDEBUG conditional instead of DEBUG.
Do not call static functions in extern inline ones.
Vector.c:67:11: error: static function 'Vector_isConsistent' is used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
- `CRT_fatalError()` is declared twice in CRT.h
- `Process_pidFormat`, `Process_writeField()` and `Process_compare` are
declared twice in Process.h
- `btime` is defined in LinuxProcess.c and also declared in
LinuxProcess.h, so drop in LinuxProcessList.h
This is a straightforward extension of the existing multi-column CPU meter
code, which now allows for up CPU meters to be displayed in up to 16 columns.
This also adds the meter declarations to all the platform-specific code.
This commit is based on a patch originally by @edef1c. The ZFS ARC is a cache
(it's in the name), which will be evicted by the kernel if memory pressure so
requires. Hence, the ARC should not be counted towards a system's total used
memory, and should instead be grouped with the other caches in the system.
Signed-off-by: edef <edef@edef.eu>
linux/Platform.c:142:17: warning: cast from function call of type 'double' to non-matching type 'int' [-Wbad-function-cast]
return (int) floor(uptime);
^~~~~~~~~~~~~
Use the more portable sysfs node /sys/devices/system/cpu/cpuX/cpufreq/scaling_cur_freq
to get the CPU frequency.
In case of an error fall back to /proc/cpuinfo .
Also use a fixed width of 4 for the frequency to avoid position jumps
in case the frequency moves in the range 900-1100 MHz.
unsigned overflow is well defined, but creates noise when using
sanitizers. unsigned overflow can be a symptom of logic issues of
counter, so its reasonable to use.
linux/LinuxProcessList.c:64:50: runtime error: unsigned integer overflow: 0 - 1 cannot be represented in type 'unsigned int'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:64:50 in
linux/LinuxProcessList.c:64:11: runtime error: implicit conversion from type 'unsigned int' of value 4294967295 (32-bit, unsigned) to type 'int' changed the value to -1 (32-bit, signed)
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:64:11 in
linux/LinuxProcessList.c:64:78: runtime error: unsigned integer overflow: 4 - 136 cannot be represented in type 'unsigned int'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:64:78 in
`env` is allocated by checked allocation functions and can not be NULL.
This checks confuses clang analyzer and causes a null-dereference
warning on `env[size-1]`.
The MIN, MAX, CLAMP, MINIMUM, and MAXIMUM macros appear
throughout the codebase with many re-definitions. Make
a single copy of each in a common header file, and use
the BSD variants of MINIMUM/MAXIMUM due to conflicts in
the system <sys/param.h> headers.
Reasoning:
- implementation was unsound -- broke down when I added a fairly
basic macro definition expanding to a struct initializer in a *.c
file.
- made it way too easy (e.g. via otherwise totally innocuous git
commands) to end up with timestamps such that it always ran
MakeHeader.py but never used its output, leading to overbuild noise
when running what should be a null 'make'.
- but mostly: it's just an awkward way of dealing with C code.
Promote the Arg union to a core data type in Object.c such
that it is visible everywhere (many source files need it),
and correct declarations of several functions that use it.
The Process_sendSignal function is also corrected to have
the expected return type (bool, not void) - an error being
masked by ignoring this not-quite-harmless warning. I've
also added error checking to the kill(2) call here, which
was previously overlooked / missing (?).
Extends the MakeHeader script to auto-generate correct "extern"
function declarations in some cases that it currently does not.
Related to https://github.com/hishamhm/htop/pull/981
openzfs_sysctl_init() now returns void instead of int.
The ZfsArcStats->enabled flag is set inside the init function
now, instead of having to be set from its return value.
Preparation for more flag setting in Compressed ARC commit.
ZfsArcMeter_readStats() added and all Meter->values[] setting
moved to it, eliminating duplicated code in
{darwin,freebsd,linux,solaris}/Platform.c.
The option is only implemented on Linux. On other platforms, and on Linuxes
that do not expose the relevant sysfs file, the frequency will be 0.
The "CPU average" meter does not show a frequency, only
the individual per-CPU meters.
If no pools are imported (ARC size == 0) or the
ZFS module is not in the kernel (/proc/spl/kstat/zfs/arcstats
does not exist), then the Meter reports "Unavailable".
The pressure stall information (PSI) metrics provide useful information
on delays caused by waiting for CPU, IO and memory. Particularly on busy
servers it can provide a quick overview of what's "slowing things down".
This feature is supported on Linux >= 4.20.
The interface is documented here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/Documentation/accounting/psi.txt
These links provide rationale:
https://lwn.net/Articles/759781/https://facebookmicrosites.github.io/psi/
The following metrics are added, corresponding to the currently exposed
lines (see `head /proc/pressure/*`):
- PressureStallCPUSome
- PressureStallIOSome
- PressureStallIOFull
- PressureStallMemorySome
- PressureStallMemoryFull
The color scheme is the same as that used for Load Average, however I
gave it separate entries just in case someone wants to change them
specifically.
Tested on 4.20.7-arch1-1-ARCH, on the linux platform.
Also tested that other platforms still compile (changed configure to use
the unsupported platform).
Closes#879.
Disable the follow process logic in Action_pickFromVector(), when
selecting sort order or user filter, since they don't apply on specific
process.
Fix#856
this way a remount of /proc will not reset starttimes
and we can also see startup times for processes started before the mount
of /proc
also record btime (boot time in seconds since epoch) as Linux semi-global
glibc 2.28 no longer defines 'major' and 'minor' in <sys/types.h> and
requires us to include <sys/sysmacros.h>. (glibc 2.25 starts
deprecating the macros in <sys/types.h>.) Now do include the latter if
found on the system.
At the moment, let's also utilize AC_HEADER_MAJOR in configure script.
However as Autoconf 2.69 has not yet updated the AC_HEADER_MAJOR macro
to reflect the glibc change [1], so add a workaround code.
Fixes#663. Supersedes pull request #729.
Reference:
[1] https://git.savannah.gnu.org/gitweb/?p=autoconf.git;a=commit;h=e17a30e987d7ee695fb4294a82d987ec3dc9b974
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
The "if" tests if the character at index "5" is 'r', as a first quick
check. However at index "5" will always be a colon ":". This patch fixes
the off-by-one error. htop now shows proper values in the RD_SYSC
column.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linux commit 06eb61844d841d0032a9950ce7f8e783ee49c0d0 ("sched/debug:
Add explicit TASK_IDLE printing") exposes kthreads idling using
TASK_IDLE in procfs as "I (idle)".
Until now, when sorting the STATE ("S") column, htop used the raw
value of the state character for comparison, however that led to the
undesirable effect of TASK_IDLE ('I') tasks being sorted above tasks
that were running ('R').
Thus, explicitly recognize the idle process state, and sort it below
others.
Adds support for showing columns with linux delay accounting.
This information can be read from the netlink interface, and thus we set up a socket to read from that when initializing the LinuxProcessList (LinuxProcessList_initNetlinkSocket). After that, for each process we call LinuxProcessList_readDelayAcctData, which sends a message thru the socket after setting up a callback to get the answer from the Kernel. That callback sets the process total delay time attribute. We then set the delay percent as the percentage of time process cpu time since last scan.
Specifically, Platform_signals[] and Platform_numberOfSignals. Both are
not supposed to be mutable. Marking them 'const' puts them into rodata
sections in binary. And for Platform_numberOfSignals, this aids
optimization (aids only Link Time Optimization for now). :)
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Use strncmp() combined with a strlen() will give better performance
than a strstr in worst case. Especially when the match prefix is a
constant and not a variable.
While we are at it, replace the match() function in linux/Battery.c,
which uses a naive algorithm, with a macro that does better job by
utilizing Strings_startWith().
$ gcc --version | head -n 1
gcc (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4
$ uname -m
x86_64
$ size htop.old htop.new
text data bss dec hex filename
137929 15112 3776 156817 26491 htop.old
137784 15104 3776 156664 263f8 htop.new
Signed-off-by: Kang-Che Sung <explorer09 @ gmail.com>
* Dynamically adjust the size of line reads.
* Remove some more uses of fgets with arbitrary sizes.
* Fix reading of lines and width of n column.
Fixes#514.
Once a process goes zombie on Linux, /proc/PID/cmdline
gets empty. So, when we detect it is a zombie we stop
reading this file.
For processes that were zombies before htop started,
there's no way to get the full name.
Closes#49.
Got a report in #397 that htop runs in NetBSD
masquerading as Linux and using a compatibility /proc
(like we used to in FreeBSD) and that it builds fine
apart from this syscall.
With the CLAMP macro replacing the combination of MIN and MAX, we will
have at least two advantages:
1. It's more obvious semantically.
2. There are no more mixes of confusing uses like MIN(MAX(a,b),c) and
MAX(MIN(a,b),c) and MIN(a,MAX(b,c)) appearing everywhere. We unify
the 'clamping' with a single macro.
Note that the behavior of this CLAMP macro is different from
the combination `MAX(low,MIN(x,high))`.
* This CLAMP macro expands to two comparisons instead of three from
MAX and MIN combination. In theory, this makes the code slightly
smaller, in case that (low) or (high) or both are computed at
runtime, so that compilers cannot optimize them. (The third
comparison will matter if (low)>(high); see below.)
* CLAMP has a side effect, that if (low)>(high) it will produce weird
results. Unlike MIN & MAX which will force either (low) or (high) to
win. No assertion of ((low)<=(high)) is done in this macro, for now.
This CLAMP macro is implemented like described in glib
<http://developer.gnome.org/glib/stable/glib-Standard-Macros.html>
and does not handle weird uses like CLAMP(a++, low++, high--) .
reclaimable slab as cached memory.
Hopefully this presents a more truthful representation of
available vs. used memory on Linux.
See brndnmtthws/conky#82, #242, #67, #263.
Implementations for Linux (tested) and FreeBSD (still untested, thanks to @etosan for providing the table).
Darwin and OpenBSD(ping @mmcco) builds should be broken now, pending their own tables.
* size_t nmemb (number of elements) first, then size_t size
* do not assume char is size 1 but use sizeof()
* allocate for char, not pointer to char (found by Michael McConville,
fixes#261)
gcc gives warnings like this:
warning: ignoring return value of ‘fscanf’, declared with attribute
warn_unused_result
Assign value to a variable, cast to (void) to discard it.
Christian Göttsche