add rpi model 3b+ to tested list

This commit is contained in:
Timofey Gelazoniya 2022-06-10 20:19:39 +03:00
parent 7044d546ea
commit eebd5e8517
Signed by: zeldon
GPG Key ID: 047886915281DD2A
1 changed files with 54 additions and 53 deletions

97
README
View File

@ -20,6 +20,7 @@ This fork was created for personal use; correct operation is not guaranteed.
- Manjaro ARM Minimal (Raspberry Pi 4)
- Debian 11 (Raspberry Pi 4)
- Ubuntu Server 22.04 (Raspberry Pi 4)
- Raspbian 64bit (Raspberry Pi 3B+)
- Arch Linux (x86 PC), used for the screenshot above
</details>
@ -47,26 +48,26 @@ For more information and details visit [htop.dev](https://htop.dev).
List of build-time dependencies:
* standard GNU autotools-based C toolchain
* C99 compliant compiler
* `autoconf`
* `autotools`
* `ncurses`
- standard GNU autotools-based C toolchain
- C99 compliant compiler
- `autoconf`
- `autotools`
- `ncurses`
**Note about `ncurses`:**
> `htop` requires `ncurses` 6.0. Be aware the appropriate package is sometimes still called libncurses5 (on Debian/Ubuntu). Also `ncurses` usually comes in two flavours:
>
>* With Unicode support.
>* Without Unicode support.
>- With Unicode support.
>- Without Unicode support.
>
> This is also something that is reflected in the package name on Debian/Ubuntu (via the additional 'w' - 'w'ide character support).
List of additional build-time dependencies (based on feature flags):
* `sensors`
* `hwloc`
* `libcap` (v2.21 or later)
* `libnl-3`
- `sensors`
- `hwloc`
- `libcap` (v2.21 or later)
- `libnl-3`
Install these and other required packages for C development from your package manager.
@ -112,63 +113,63 @@ To install on the local system run `make install`. By default `make install` ins
#### Generic
* `--enable-unicode`:
- `--enable-unicode`:
enable Unicode support
* dependency: *libncursesw*
* default: *yes*
* `--enable-affinity`:
- dependency: *libncursesw*
- default: *yes*
- `--enable-affinity`:
enable `sched_setaffinity(2)` and `sched_getaffinity(2)` for affinity support; conflicts with hwloc
* default: *check*
* `--enable-hwloc`:
- default: *check*
- `--enable-hwloc`:
enable hwloc support for CPU affinity; disables affinity support
* dependency: *libhwloc*
* default: *no*
* `--enable-static`:
- dependency: *libhwloc*
- default: *no*
- `--enable-static`:
build a static htop binary; hwloc and delay accounting are not supported
* default: *no*
* `--enable-debug`:
- default: *no*
- `--enable-debug`:
Enable asserts and internal sanity checks; implies a performance penalty
* default: *no*
- default: *no*
#### Performance Co-Pilot
* `--enable-pcp`:
- `--enable-pcp`:
enable Performance Co-Pilot support via a new pcp-htop utility
* dependency: *libpcp*
* default: *no*
- dependency: *libpcp*
- default: *no*
#### Linux
* `--enable-sensors`:
- `--enable-sensors`:
enable libsensors(3) support for reading temperature data
* dependencies: *libsensors-dev*(build-time), at runtime *libsensors* is loaded via `dlopen(3)` if available
* default: *check*
* `--enable-capabilities`:
- dependencies: *libsensors-dev*(build-time), at runtime *libsensors* is loaded via `dlopen(3)` if available
- default: *check*
- `--enable-capabilities`:
enable Linux capabilities support
* dependency: *libcap*
* default: *check*
* `--with-proc`:
- dependency: *libcap*
- default: *check*
- `--with-proc`:
location of a Linux-compatible proc filesystem
* default: */proc*
* `--enable-openvz`:
- default: */proc*
- `--enable-openvz`:
enable OpenVZ support
* default: *no*
* `--enable-vserver`:
- default: *no*
- `--enable-vserver`:
enable VServer support
* default: *no*
* `--enable-ancient-vserver`:
- default: *no*
- `--enable-ancient-vserver`:
enable ancient VServer support (implies `--enable-vserver`)
* default: *no*
* `--enable-delayacct`:
- default: *no*
- `--enable-delayacct`:
enable Linux delay accounting support
* dependencies: *pkg-config*(build-time), *libnl-3* and *libnl-genl-3*
* default: *check*
- dependencies: *pkg-config*(build-time), *libnl-3* and *libnl-genl-3*
- default: *check*
## Runtime dependencies
`htop` has a set of fixed minimum runtime dependencies, which is kept as minimal as possible:
* `ncurses` libraries for terminal handling (wide character support).
- `ncurses` libraries for terminal handling (wide character support).
### Runtime optional dependencies
@ -176,10 +177,10 @@ To install on the local system run `make install`. By default `make install` ins
#### Linux
* `libdl`, if not building a static binary, is always required when support for optional dependencies (i.e. `libsensors`, `libsystemd`) is present.
* `libcap`, user-space interfaces to POSIX 1003.1e capabilities, is always required when `--enable-capabilities` was used to configure `htop`.
* `libsensors`, readout of temperatures and CPU speeds, is optional even when `--enable-sensors` was used to configure `htop`.
* `libsystemd` is optional when `--enable-static` was not used to configure `htop`. If building statically and `libsystemd` is not found by `configure`, support for the systemd meter is disabled entirely.
- `libdl`, if not building a static binary, is always required when support for optional dependencies (i.e. `libsensors`, `libsystemd`) is present.
- `libcap`, user-space interfaces to POSIX 1003.1e capabilities, is always required when `--enable-capabilities` was used to configure `htop`.
- `libsensors`, readout of temperatures and CPU speeds, is optional even when `--enable-sensors` was used to configure `htop`.
- `libsystemd` is optional when `--enable-static` was not used to configure `htop`. If building statically and `libsystemd` is not found by `configure`, support for the systemd meter is disabled entirely.
`htop` checks for the availability of the actual runtime libraries as `htop` runs.