- fix header width of IO_READ_RATE
- save data in bytes (not kilobytes) to better compute rate
- fix rate data: multiply with 1000 to compensate time difference in
milliseconds
- rename unit less variable now into realtimeMs
- use Process_printBytes(..., data * pageSize, ...) instead of
Process_printKBytes(..., data * pageSizeKB, ...) to avoid wrapper
Make functions formatting data for a process field column less error
prone, unify interfaces and improve some internals.
* Process_printBytes
- rename from Process_humanNumber
- take number in bytes, not kilobytes
- handle petabytes
- increase buffer to avoid crashes when the passed value is
~ ULLONG_MAX
* Process_printKBytes
- add wrapper for Process_printBytes taking kilobytes keeping -1 as
special value
* Process_printCount
- rename from Process_colorNumber
* Process_printTime
- add coloring parameter as other print functions
- improve coloring and formatting for larger times
* Process_printRate
- rename from Process_outputRate
- use local buffer instead of passed one; this function prints to the
RichString after all
`RichString_appendWide()` is more expensive than
`RichString_appendAscii()` due to the calls to `mbstowcs(3)` and
`iswprint(3)`.
Use the latter to print the process field buffer by default.
For the following fields this theoretically can corrupt the output:
- SECATTR
- CGROUP
- CTID
`RichString_appendnAscii()` avoids a `strlen(3)` call over
` RichString_appendAscii()`.
Use the former where the length is available from a previous checked
`snprintf(3)` call.
Keep `RichString_appendAscii()` when passing a string literal and
rely on compilers to optimize the `strlen(3)` call away.
* Rename internal identifier from TTY_NR to just TTY
* Unify column header on platforms
* Use devname(3) on BSD derivate to show the actual terminal,
simplifies current FreeBSD implementation.
* Use 'unsigned long int' as id type, to fit dev_t on Linux.
Only on Solaris the terminal path is not yet resolved.
Refactor the sample time code to make one call to gettimeofday
(aka the realtime clock in clock_gettime, when available) and
one to the monotonic clock. Stores each in more appropriately
named ProcessList fields for ready access when needed. Every
platform gets the opportunity to provide their own clock code,
and the existing Mac OS X specific code is moved below darwin
instead of in Compat.
A couple of leftover time(2) calls are converted to use these
ProcessList fields as well, instead of yet again sampling the
system clock.
Related to https://github.com/htop-dev/htop/pull/574
The end goal is to consolidate all the points in htop that can only work in
live-only mode today, so that will be able to inject PCP archive mode and have
a chance at it working.
The biggest problem we've got at this moment is all the places that are
independently asking the kernel to 'give me the time right now'.
Each of those needs to be audited and ultimately changed to allow platforms to
manage their own idea of time.
So, all the calls to gettimeofday(2) and time(2) are potential problems.
Ultimately I want to get these down to just one or two.
Related to https://github.com/htop-dev/htop/pull/574
The libcap code is Linux-specific so move it all below
the linux/ platform subdirectory. As this feature has
custom command-line long options I provide a mechanism
whereby each platform can add custom long options that
augment the main htop options. We'll make use this of
this with the pcp/ platform in due course to implement
the --host and --archive options there.
Related to https://github.com/htop-dev/htop/pull/536
This prefers the `#if defined()` syntax over the `#ifdef` variant
whenever there's also a `#elif defined()` clause, thus making the
multiple branching structure more obvious and the overall use
more consistent.
Do not read driver depended labels, just count the number of
temperatures given:
on #CPU:
platform temp = max cpu temp
CPU temps = first to last
on #CPU + 1:
platform temp = first temp
CPU temps = second to last
on #CPU / 2:
platform temp = max cpu temp
CPU temps = first to last concat first to last
(with SMT core x + cpu count is the logical core of the physical
core x)
on #CPU / 2 + 1:
platform temp = first temp
CPU temps = second to last concat second to last
(with SMT core x + cpu count is the logical core of the physical
core x)
Closes: #529Closes: #538
Combine reading CPU count and CPU usage, only open the file once.
Do not separately initialize totalPeriod and totalTime, cause the value
0 is handled in Platform_setCPUValues().
Take the number of currently running process from the entry
procs_running in /proc/stat instead of counting all scanned process
with state 'R', to include hidden tasks, e.g. threads.
Code that is shared across some (but not all) platforms
is moved into a 'generic' home. Makefile.am cleanups to
match plus some minor alphabetic reordering/formatting.
As discussed in https://github.com/htop-dev/htop/pull/553
Several of our newer meters have merged coding concerns in terms
of extracting values and displaying those values. This commit
rectifies that for the SysArch and Hostname meters, allowing use
of this code with alternative front/back ends. The SysArch code
is also refined to detect whether the platform has an os-release
file at all and/or the sys/utsname.h header via configure.ac.
On Linux kernels the size of the values exported for block
device bytes has used a 64 bit integer for quite some time
(2.6+ IIRC). Make the procfs value extraction use correct
types and change internal types used to rate convert these
counters (within the DiskIO Meter) 64 bit integers, where
appropriate.
On Linux kernels the size of the values exported for network
device bytes and packets has used a 64 bit integer for quite
some time (2.6+ IIRC). Make the procfs value extraction use
correct types and change internal types used to rate convert
these counters (within the NetworkIO Meter) 64 bit integers,
where appropriate.
Use similar calculation than procps.
Show AvailableMemory in text mode.
Use total minus available memory instead of manually computed used-
memory as fraction part in bar mode (if available).
The State struct holds a pointer to the main process panel.
Use the distinct MainPanel type, to improve maintainability regrading
its usage.
This avoids usages of down-casts from Panel to MainPanel, only up-casts
from MainPanel to Panel are now required.
At start, SysArchMeter calls the uname function to obtain the kernel
version and architecture. If available, the distro version is obtained
by calling lsb_release. The obtained values are stored in static
variables and used when updating the meter.
pgrp and session might be -1
linux/LinuxProcessList.c:312:20: runtime error: implicit conversion from type 'unsigned long' of value 18446744073709551615 (64-bit, unsigned) to type 'unsigned int' changed the value to 4294967295 (32-bit, unsigned)
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:312:20 in
linux/LinuxProcessList.c:314:23: runtime error: implicit conversion from type 'unsigned long' of value 18446744073709551615 (64-bit, unsigned) to type 'unsigned int' changed the value to 4294967295 (32-bit, unsigned)
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:314:23 in
- avoid UBSAN conversions
- print N/A on no data (i.e. as unprivileged user)
- fix rate calculation to show bytes (instead of a thousandth)
- print bytes as human number (i.e. 8MB) instead of 8388608
- stabilize sorting by adjusting NAN values to very tiny negative number
If no terminal name can be found, fall back to generic display method
with major and minor device numbers.
Print special value '(none)' in case both are zero.
On some AMD and Intel CPUs read()ing scaling_cur_freq is quite slow
(> 1ms). This delay accumulates for every core.
If the read on CPU 0 takes longer than 500us bail out and fall back to
reading the frequencies from /proc/cpuinfo.
Once the condition has been met, bail out early for the next couple of
scans.
Closes: #471
According to the Linux kernel documentation, "SwapCached" tracks "memory
that once was swapped out, is swapped back in but still also is
in the swapfile (if memory is needed it doesn't need to be swapped out
AGAIN because it is already in the swapfile. This saves I/O)."
It is only used on Linux to optimize memory handling in case the command
changes to a smaller-or-equal string.
This "optimization" however causes more code bloat and maintenance cost
on string handling issues than it gains.
Use only one enum instead of a global and a platform specific one.
Drop Platform_numberOfFields global variable.
Set known size of Process_fields array
This acheives two things:
- Allows for simple tie-breaking if values compare equal (needed to make sorting the tree-view stable)
- Allows for platform-dependent overriding of the sort-order for specific fields
Also fixes a small oversight on DragonFlyBSD when default-sorting.
* This removes duplicated code that adjusts the sort direction from every
OS-specific folder.
* Most fields in a regular htop screen are OS-independent, so trying
Process_compare first and only falling back to the OS-specific
compareByKey function if it's an OS-specific field makes sense.
* This will allow us to override the sortKey in a global way without having
to edit each OS-specific file.
There is a possible path - albeit theoretical really - through
the btime initialization code in Linux ProcessList_new(), when
String_startsWith() is always false, which can result in btime
not being initialized.
This commit refactors the code to remove that possibility.
Small cleanups - add error handling, remove a local static
variable and refactor LinuxProcess_adjustTime (also rename
it, as its in LinuxProcessList.c not LinuxProcess.c) - and
while there, move the related 'btime' global variable into
LinuxProcessList.c so it can be made static.
Resolves https://github.com/htop-dev/htop/issues/384
libsensors.so is provided only by the -dev package, so search for
libsensors.so.5 (installed from the libsensors5 package) explicitly
see: dpkg-query -S libsensors.so
By storing the per-process m_resident and m_virt values in the form
htop wants to display them in (KB, not pages), we no longer need to
have definitions of pageSize and pageSizeKB in the common CRT code.
These variables were never really CRT (i.e. display) related in the
first place. It turns out the darwin platform code doesn't need to
use these at all (the process values are extracted from the kernel
in bytes not pages) and the other platforms can each use their own
local pagesize variables, in more appropriate locations.
Some platforms were actually already doing this, so this change is
removing duplication of logic and variables there.
RichString_writeFrom takes a top spot during performance analysis due to the
calls to mbstowcs() and iswprint().
Most of the time we know in advance that we are only going to print regular
ASCII characters.
linux/SELinuxMeter.c: In function ‘hasSELinuxMount’:
linux/SELinuxMeter.c:38:21: warning: comparison of integer expressions of different signedness: ‘__fsword_t’ {aka ‘int’} and ‘unsigned int’ [-Wsign-compare]
38 | if (sfbuf.f_type != SELINUX_MAGIC) {
| ^~
Origin: 7df27b78e9/libselinux/src/init.c (L40)
linux/LinuxProcessList.c:1403:63: runtime error: division by zero
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior linux/LinuxProcessList.c:1403:63 in
The global ProcessList structure contains a couple of unused
fields. 'sharedMem' has never been used by any Meter, since
its not been anything other than zero in Linux /proc/meminfo
for many, many years. The freeMem field is only used in the
usedMem calculation, so it can reside on the stack like some
other memory variables used within-calculations-only and not
exposed to the user via a Meter.
taskstats is only checked on runtime if the column RCHAR, WCHAR, SYSCR,
SYSCW, RBYTES, WBYTES, CNCLWB, IO_READ_RATE, IO_WRITE_RATE or IO_RATE is
selected.
taskstats is currently enabled by default.
Drop the taskstats configuration switch, to reduce the maintenance cost.
cgroup is only checked on runtime if the column CGROUP is selected.
cgroup is currently disabled by default, but most distributions do
enable it.
Drop the cgroup configuration switch, to reduce the maintenance cost.
Benny Baumann